In the paper, the Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray Spectroscopy (EDS) and X-ray Photoelectron Spectroscopy (XPS) results of the surface layer formed on pure titanium after plasma electrolytic oxidation (micro arc oxidation) at the voltage of 450 V are shown. As an electrolyte, the mixture of copper nitrate Cu(NO3)2 (10–600 g/L) in concentrated phosphoric acid H3PO4 (98 g/mol) was used. The thickness of the obtained porous surface layer equals about 10 μm, and it consists mainly of titanium phosphates and oxygen with embedded copper ions as a bactericidal agent. The maximum percent of copper in the PEO surface layer was equal to 12.2 ± 0.7 wt % (7.6 ± 0.5 at %), which is the best result that the authors obtaine...
In the paper, the effect of voltage increase (from 500 VDC up to 650 VDC) on the structure and chemi...
In the paper, Scanning Electron Microscopy (SEM), Energy-dispersive X-ray Spectroscopy (EDS), X-ray ...
U radu su opisani rezultati SEM i EDS analize površinskih slojeva nastalih na legurama niobija i tit...
In the paper, the Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray Spectroscopy (EDS)...
In the paper, the Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray Spectroscopy (EDS...
Plasma Electrolytic Oxidation-PEO (Micro Arc Oxidation-MAO) as a surface layer modification method i...
In the paper, the porous coatings obtained on niobium and two titanium alloys (Ti6Al4V, and TNZ) aft...
To fabricate porous copper coatings on titanium, we used the process of plasma electrolyticoxidation...
Porous coatings on titanium may be obtained by AC or DC Plasma Electrolytic Oxidation (PEO) process....
In the present paper, coatings obtained on CP Titanium Grade 2 samples by Plasma Electrolytic Oxidat...
The porous coatings may be fabricated on titanium substrate by Plasma Electrolytic Oxidation (PEO), ...
The Plasma Electrolytic Oxidation (PEO) process may be used to fabricate porous coatings on titanium...
Plasma Electrolytic Oxidation (PEO) known also as Micro Arc Oxidation (MAO) process is widely used t...
In the present paper, the SEM and EDS results of porous and enriched in calcium and/or zinc coatings...
The present study investigated the surface characteristics of pure titanium subjected to a plasma el...
In the paper, the effect of voltage increase (from 500 VDC up to 650 VDC) on the structure and chemi...
In the paper, Scanning Electron Microscopy (SEM), Energy-dispersive X-ray Spectroscopy (EDS), X-ray ...
U radu su opisani rezultati SEM i EDS analize površinskih slojeva nastalih na legurama niobija i tit...
In the paper, the Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray Spectroscopy (EDS)...
In the paper, the Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray Spectroscopy (EDS...
Plasma Electrolytic Oxidation-PEO (Micro Arc Oxidation-MAO) as a surface layer modification method i...
In the paper, the porous coatings obtained on niobium and two titanium alloys (Ti6Al4V, and TNZ) aft...
To fabricate porous copper coatings on titanium, we used the process of plasma electrolyticoxidation...
Porous coatings on titanium may be obtained by AC or DC Plasma Electrolytic Oxidation (PEO) process....
In the present paper, coatings obtained on CP Titanium Grade 2 samples by Plasma Electrolytic Oxidat...
The porous coatings may be fabricated on titanium substrate by Plasma Electrolytic Oxidation (PEO), ...
The Plasma Electrolytic Oxidation (PEO) process may be used to fabricate porous coatings on titanium...
Plasma Electrolytic Oxidation (PEO) known also as Micro Arc Oxidation (MAO) process is widely used t...
In the present paper, the SEM and EDS results of porous and enriched in calcium and/or zinc coatings...
The present study investigated the surface characteristics of pure titanium subjected to a plasma el...
In the paper, the effect of voltage increase (from 500 VDC up to 650 VDC) on the structure and chemi...
In the paper, Scanning Electron Microscopy (SEM), Energy-dispersive X-ray Spectroscopy (EDS), X-ray ...
U radu su opisani rezultati SEM i EDS analize površinskih slojeva nastalih na legurama niobija i tit...