Air–liquid interactions in a pressure-swirl spray

The energy transfer between a liquid hollow cone spray and the surrounding air has been studied using both imaging and phase-Doppler techniques. The spray was produced by a pressure-swirl atomizer discharging Jet A-1 fuel at inlet over pressures of dp = 0.5, 1.0 and 1.5 MPa into quiescent ambient air. The liquid exits the nozzle as a conical film which thins as it spreads and develops long- and short-wave sinusoidal instabilities with breakup occurring, at the length smaller than that predicted by the inviscid model, to form film fragments and ultimately droplets downstream the spray. The single shot imaging characterised the spray regions of near-nozzle flow, the breakup processes and the developed spray. The phase-Doppler system resolved the three components of velocity and size for the droplet flow as measured on radial profiles for four axial distances from the nozzle exit. A Stokes number, Stk, analysis of the droplets’ response times to the airflow time-scales showed that droplets 10) move ballistically. The spatially resolved mean and turbulent kinetic energies of the air and spectra of the droplet velocity fluctuations are detailed in the paper. These findings are relevant to scientists and engineers modelling the complex two-phase flows