Abstract: The structure and properties of metallic multicomponent Fe–Ni–Co–Cr–Cu and Fe–Ni–Co–Cu–Cr system alloys (x is the component content, at %), which are the basis of the wide class of high-entropy alloys, are studied. The synthesized alloys are investigated using instrumental analysis methods (DTA, SEM-EPMA, XRD), and the concentration and temperature boundaries of the fcc solid solution have been determined
AbstractEqui-atomic and non equi-atomic multi-component systems were synthesized through different r...
For a long time, development of alloys was restricted to one principal element, or two, with minor e...
Four FexCoNiCu (x = 1.5, 2, 2.5 and, 3) high entropy alloys were fabricated by vacuum inductive melt...
Multi-component High Entropy Alloys (HEAs) are observed to form simple solid solutions in contrary t...
CuCrFeVTi, CuCrFeVTi, CuCrFeVTi and CuCrFeVTi were produced by low-pressure arc-melting to evaluate ...
International audienceIn order to systematically compare high entropy alloys (HEA) and conventional ...
High entropy alloys (HEA), a relatively new class of alloy, manifest a rapidly growing interest beca...
International audienceThe mechanical properties due to solid solution strengthening are explored wit...
The aim of the study was to synthesize and characterize the selected in-situ composites from the Fe-...
Microstructure and mechanical properties of equimolar composition alloys FeCrCoNi, FeCrCoNiV, FeCrCo...
International audienceNew face-centered cubic (FCC) multicomponent alloys designed through the high-...
Four non-equiatomic Fe-(Co, Mn)-Cr-Ni-Al-(Ti) high entropy alloys, namely Fe₃₆Mn₂₁Cr₁₈Ni₁₅Al₁₀, Fe₃₆...
ABSTRACT: The present work reports the production and key properties of the CuCrFeTiV high entropy a...
The structure and solidification of CoCrCu-X MPEAs with X = Fe, Mn, Ni, Ti, V, FeMn, FeNi, FeTi, FeV...
A series of equatomic AlCoCrFeNi alloys prepared through various synthesis techniques is systematica...
AbstractEqui-atomic and non equi-atomic multi-component systems were synthesized through different r...
For a long time, development of alloys was restricted to one principal element, or two, with minor e...
Four FexCoNiCu (x = 1.5, 2, 2.5 and, 3) high entropy alloys were fabricated by vacuum inductive melt...
Multi-component High Entropy Alloys (HEAs) are observed to form simple solid solutions in contrary t...
CuCrFeVTi, CuCrFeVTi, CuCrFeVTi and CuCrFeVTi were produced by low-pressure arc-melting to evaluate ...
International audienceIn order to systematically compare high entropy alloys (HEA) and conventional ...
High entropy alloys (HEA), a relatively new class of alloy, manifest a rapidly growing interest beca...
International audienceThe mechanical properties due to solid solution strengthening are explored wit...
The aim of the study was to synthesize and characterize the selected in-situ composites from the Fe-...
Microstructure and mechanical properties of equimolar composition alloys FeCrCoNi, FeCrCoNiV, FeCrCo...
International audienceNew face-centered cubic (FCC) multicomponent alloys designed through the high-...
Four non-equiatomic Fe-(Co, Mn)-Cr-Ni-Al-(Ti) high entropy alloys, namely Fe₃₆Mn₂₁Cr₁₈Ni₁₅Al₁₀, Fe₃₆...
ABSTRACT: The present work reports the production and key properties of the CuCrFeTiV high entropy a...
The structure and solidification of CoCrCu-X MPEAs with X = Fe, Mn, Ni, Ti, V, FeMn, FeNi, FeTi, FeV...
A series of equatomic AlCoCrFeNi alloys prepared through various synthesis techniques is systematica...
AbstractEqui-atomic and non equi-atomic multi-component systems were synthesized through different r...
For a long time, development of alloys was restricted to one principal element, or two, with minor e...
Four FexCoNiCu (x = 1.5, 2, 2.5 and, 3) high entropy alloys were fabricated by vacuum inductive melt...