The influence of annealing of titanium oxide films on the currents of metal-TiO2-n-Si structures was investigated. It has been shown that regardless of the annealing temperature the conductivity of structures at positive potentials on the gate is determined by currents limited by the space charge in the dielectric with traps exponentially distributed on energy. At negative potentials the main contribution to the current is the thermal generation of charge carriers in the space charge region in the silicon. Interface properties of TiO2-n-Si depend on the structural and phase state of the titanium oxide film which are determined by the annealing temperature
WOS: 000290006900028Undoped and Pd-doped titanium oxide thin films (0.5 wt.%) were prepared by the s...
High dielectric constant TiO2 thin films are promising for gate insulator in 100-nm microelectronic ...
Titanium dioxide (TiO2) thin films were deposited onto p-Si substrates held at room temperature by r...
The effects of thermal annealing and exposure to oxygen plasma on the electrical and photoelectric p...
The conduction model has been proposed for the metal-TiO2–Si (MIS) structures. Rutile films have bee...
Metal-oxide semiconductor capacitors based on titanium dioxide (TiO2) gate dielectrics were prepared...
We studied the structural and electrical properties of TiO2 thin films grown by thermal oxidation of...
Thin films of TiO2 were grown on n-type Si substrate by thermal oxidation of Ti films deposited by d...
Post-deposition annealing (PDA) is an inherent part of a sol-gel fabrication process to achieve the ...
Titanium dioxide (TiO2) thin films are deposited on unheated p-Si (100) and quartz substrates by emp...
The capacitance-voltage-temperature (C-V-T) and the conductance/angular frequency-voltage-temperatur...
Oxide-semiconductor interface quality of high-pressure reactive sputtered (HPRS) TiO2 films annealed...
Titanium dioxide (TiO2) thin film was deposited on n-Si (100) substrate by reactive DC magnetron spu...
High-kappa TiO2 thin films have been fabricated using cost effective sol-gel and spin-coating techni...
Titanium dioxide thin films were obtained by a dc sputtering technique onto heated glass substrates....
WOS: 000290006900028Undoped and Pd-doped titanium oxide thin films (0.5 wt.%) were prepared by the s...
High dielectric constant TiO2 thin films are promising for gate insulator in 100-nm microelectronic ...
Titanium dioxide (TiO2) thin films were deposited onto p-Si substrates held at room temperature by r...
The effects of thermal annealing and exposure to oxygen plasma on the electrical and photoelectric p...
The conduction model has been proposed for the metal-TiO2–Si (MIS) structures. Rutile films have bee...
Metal-oxide semiconductor capacitors based on titanium dioxide (TiO2) gate dielectrics were prepared...
We studied the structural and electrical properties of TiO2 thin films grown by thermal oxidation of...
Thin films of TiO2 were grown on n-type Si substrate by thermal oxidation of Ti films deposited by d...
Post-deposition annealing (PDA) is an inherent part of a sol-gel fabrication process to achieve the ...
Titanium dioxide (TiO2) thin films are deposited on unheated p-Si (100) and quartz substrates by emp...
The capacitance-voltage-temperature (C-V-T) and the conductance/angular frequency-voltage-temperatur...
Oxide-semiconductor interface quality of high-pressure reactive sputtered (HPRS) TiO2 films annealed...
Titanium dioxide (TiO2) thin film was deposited on n-Si (100) substrate by reactive DC magnetron spu...
High-kappa TiO2 thin films have been fabricated using cost effective sol-gel and spin-coating techni...
Titanium dioxide thin films were obtained by a dc sputtering technique onto heated glass substrates....
WOS: 000290006900028Undoped and Pd-doped titanium oxide thin films (0.5 wt.%) were prepared by the s...
High dielectric constant TiO2 thin films are promising for gate insulator in 100-nm microelectronic ...
Titanium dioxide (TiO2) thin films were deposited onto p-Si substrates held at room temperature by r...