Effect of Acceleration on Wrap Faced Reinforced Soil Retaining Wall on Soft Clay by Performing Shaking Table Test

This research incorporates shaking table testing of scale wrap faced soil wall models to evaluate the seismic response of embankment. Currently the seismic designs of highway or railway embankment rely on little or no empirical data for calibrating numerical simulations. This research is working towards filling that empirical data gap. The specific purpose of the study was to evaluate the seismic response of constructed embankment model regarding the different input base accelerations with fixed frequency. A series of one-dimensional (1D) shaking table tests (0.05g, 0.1g, 0.15g and 0.2g), were performed on a 0.4 meters high wrap faced reinforced-soil wall model. Additionally, it was placed over 0.3 meters high soft clayey foundation. Predominantly, the influence of the base acceleration on the seismic response was studied in this paper. The physical models were subjected to harmonic sinusoidal input motions at a fixed frequency of 1 Hz, in order to assess the seismic behavior. The effects of parameters such as acceleration amplitudes and surcharge pressures on the seismic response of the model walls were considered. The relative density of the backfill material was kept fixed at 60%. The results of this study reveal that input accelerations and surcharge load had significant influence on the model wall, pore water pressure, and changes along the elevation. Acceleration response advances with the increase in base acceleration, so the difference being more perceptible at higher elevations. The pore water pressures were found to be high for high base shaking and low surcharge pressures at higher elevations. The results obtained from this study are helpful in understanding the relative performance of reinforced soil retaining wall under different test conditions resting on soft clay