The effect of NH3 on the deformation of polyester-coated galvanised steel at different relative humidities (RHs) was investigated using electrochemical impedance spectroscopy. Measurements were performed on specimens which had been tested in accelerated gaseous corrosion test. For this purpose the samples were subjected to NH3 gas for 16 and 24 days in atmospheric test cells with adjusted RH from 60 to 100%. Subsequently, the impedance response of the coated material was measured and evaluated. The results indicated that the coating performance varies with RH. At lower RH, remarkably, the coating remained effectively intact with the coating resistance varying inversely with RH. This work is relevant to the application of such organic-coated...
The corrosive effects of SO2 and NH3 gases on zinc and galvanized iron sheet have been investigated....
The aim of this study was to investigate the effects of immersion time on the electrochemical corros...
Protective coatings are the most widely used corrosion protection method for construction materials ...
The effect of SO2 on the degradation of polyester-coated galvanised steel at different relative humi...
Evaluation of the corrosion behaviour of the polyester-coated galvanized steels exposed to different...
The effect of relative humidity on the atmospheric corrosion of defective polyester-coated galvanize...
The variation of defective polyester-coated performance with time in lOxacid rain solution was inves...
The cut edge corrosion of organically coated (epoxy, polyurethane and polyester) galvanized steel wa...
The effects of sulfur dioxide on the atmospheric corrosion of epoxy-coated galvanized steels exposed...
The cut edge corrosion of polyester-coated galvanized steel was investigated using electrochemical i...
AbstractThe cut edge corrosion of organically coated (epoxy, polyurethane and polyester) galvanized ...
Electrochemical impedance spectroscopy (EIS) was used to study the corrosion behavior of different t...
This dissertation presents a study of the effect of humidity on the static and dynamic strength of a...
Electrochemical impedance spectroscopy (EIS) was used to evaluate the degree of delamination of the ...
[[abstract]]This paper reports an experimental study of the initial stage of atmospheric zinc corros...
The corrosive effects of SO2 and NH3 gases on zinc and galvanized iron sheet have been investigated....
The aim of this study was to investigate the effects of immersion time on the electrochemical corros...
Protective coatings are the most widely used corrosion protection method for construction materials ...
The effect of SO2 on the degradation of polyester-coated galvanised steel at different relative humi...
Evaluation of the corrosion behaviour of the polyester-coated galvanized steels exposed to different...
The effect of relative humidity on the atmospheric corrosion of defective polyester-coated galvanize...
The variation of defective polyester-coated performance with time in lOxacid rain solution was inves...
The cut edge corrosion of organically coated (epoxy, polyurethane and polyester) galvanized steel wa...
The effects of sulfur dioxide on the atmospheric corrosion of epoxy-coated galvanized steels exposed...
The cut edge corrosion of polyester-coated galvanized steel was investigated using electrochemical i...
AbstractThe cut edge corrosion of organically coated (epoxy, polyurethane and polyester) galvanized ...
Electrochemical impedance spectroscopy (EIS) was used to study the corrosion behavior of different t...
This dissertation presents a study of the effect of humidity on the static and dynamic strength of a...
Electrochemical impedance spectroscopy (EIS) was used to evaluate the degree of delamination of the ...
[[abstract]]This paper reports an experimental study of the initial stage of atmospheric zinc corros...
The corrosive effects of SO2 and NH3 gases on zinc and galvanized iron sheet have been investigated....
The aim of this study was to investigate the effects of immersion time on the electrochemical corros...
Protective coatings are the most widely used corrosion protection method for construction materials ...