Add to ORKG\u3cp\u3eA method to characterize motion color artifacts from temporal step response measurements of the primary colors is proposed. The apparent image is calculated from the Motion Picture Response Curves, which are the result of the convolution of the step responses with a one-frame wide shift function. The model predictions are validated with a perception experiment.\u3c/p\u3
The dynamic modulation transfer function (DMTF) is proposed to characterize the temporal behavior of...
International audienceThe primary goal of this study is to find a measurement method for motion blur...
We investigated the low-level motion mechanisms for color and luminance and their integration proces...
\u3cp\u3eA simulation method based on temporal step response measurements is used to model motion ar...
LCD motion blur is a well-known phenomenon, and a lot of research is attributed to characterize and ...
A method is proposed to measure and characterize motion artifacts in matrix displays. By using a fas...
The scanning-backlight technique to improve the motion performance of LCDs is introduced. This techn...
Abstract—Liquid crystal displays (LCDs) have shown great promise in the consumer market for their us...
Techniques to reduce LCD motion blur are extensively used in industry and they depend on an inherent...
An experimentally simple method is proposed to to determine motion blur in Liquid crystal display (L...
Abstract — The primary goal of this study is to find a measurement method for motion blur which is e...
During the last decade we have seen high quality image and video cameras and displays become widely ...
Today there is no requirement concerning LCD motion blur in TCO Requirements ( e.g. TCO'06 Medi...
Abstract—Liquid crystal display (LCD) devices are well known for their slow responses due to the phy...
The dynamic modulation transfer function (DMTF) is proposed to characterize the temporal behavior of...
International audienceThe primary goal of this study is to find a measurement method for motion blur...
We investigated the low-level motion mechanisms for color and luminance and their integration proces...
\u3cp\u3eA simulation method based on temporal step response measurements is used to model motion ar...
LCD motion blur is a well-known phenomenon, and a lot of research is attributed to characterize and ...
A method is proposed to measure and characterize motion artifacts in matrix displays. By using a fas...
The scanning-backlight technique to improve the motion performance of LCDs is introduced. This techn...
Abstract—Liquid crystal displays (LCDs) have shown great promise in the consumer market for their us...
Techniques to reduce LCD motion blur are extensively used in industry and they depend on an inherent...
An experimentally simple method is proposed to to determine motion blur in Liquid crystal display (L...
Abstract — The primary goal of this study is to find a measurement method for motion blur which is e...
During the last decade we have seen high quality image and video cameras and displays become widely ...
Today there is no requirement concerning LCD motion blur in TCO Requirements ( e.g. TCO'06 Medi...
Abstract—Liquid crystal display (LCD) devices are well known for their slow responses due to the phy...
The dynamic modulation transfer function (DMTF) is proposed to characterize the temporal behavior of...
International audienceThe primary goal of this study is to find a measurement method for motion blur...
We investigated the low-level motion mechanisms for color and luminance and their integration proces...