Compositions with tie-lines between the σ, γ, and δ phases in a ternary Re-Cr-Ni system were investigated at 1423 K by heat-treating various ternary Re-Cr-Ni alloys and a binary Re-40 at%Ni alloy in vacuum for times up to 8640 ks. The microstructures of the Re-containing alloys which had been water-quenched after various heating times were observed and their concentration profiles for Re, Cr and Ni were measured using an electron probe micro-analyzer. The Re-Cr-Ni alloys consisted of the γ phase with either the σ or δ phase. It was found that concentration profiles of the γ phase became flat after short heat treatment, but longer times of up to 8640 ks were required to achieve the same effect for the σ and δ phases. As the Cr contents in...
In this study, the isothermal sections of the Co-Re-Ta ternary system at 1100, 1200, and 1300 °...
[[abstract]]The purpose of this study is to discuss the precipitation tendencies of δ, σ, and γ phas...
The thermal stability of multiphase intermetallics at temperatures to 1400°C was investigated by stu...
Compositions with tie-lines between the γ, α, σ, and δ phases in a ternary Re-Cr-Ni system were inve...
Phase equilibria and compositions with tie-lines between the δ-Re, γ, γ′, β, Ni2Al3 as well as Re2Al...
The compositions with tie-lines between the », ·, £, ¡, and Nb(Cr,Re)2 phases in a ternary ReCrNb sy...
The isothermal cross section through the ternary phase diagram Nb–Ni–Cr at 1,100 °C was constructed ...
Co-Re-Cr alloys are being developed for high-temperature application in gas turbines. In these alloy...
The isothermal cross section through the ternary phase diagram Nb–Ni–Cr at 1,100 °C was constructed ...
The isothermal cross section through the ternary phase diagram Nb–Ni–Cr at 1,100 °C was constructed ...
The isothermal cross section through the ternary phase diagram Nb–Ni–Cr at 1,100 °C was constructed ...
Co-Re-Cr alloys are being developed for high-temperature application in gas turbines. In these alloy...
The isothermal cross section through the ternary phase diagram Nb–Ni–Cr at 1,100 °C was constructed ...
In the present work, the phase equilibria of the Ni-Ga-Cr ternary system at 850, 1000 and 1150 °C we...
A significant number of diffusion barrier coatings have been proposed; however, after a relatively s...
In this study, the isothermal sections of the Co-Re-Ta ternary system at 1100, 1200, and 1300 °...
[[abstract]]The purpose of this study is to discuss the precipitation tendencies of δ, σ, and γ phas...
The thermal stability of multiphase intermetallics at temperatures to 1400°C was investigated by stu...
Compositions with tie-lines between the γ, α, σ, and δ phases in a ternary Re-Cr-Ni system were inve...
Phase equilibria and compositions with tie-lines between the δ-Re, γ, γ′, β, Ni2Al3 as well as Re2Al...
The compositions with tie-lines between the », ·, £, ¡, and Nb(Cr,Re)2 phases in a ternary ReCrNb sy...
The isothermal cross section through the ternary phase diagram Nb–Ni–Cr at 1,100 °C was constructed ...
Co-Re-Cr alloys are being developed for high-temperature application in gas turbines. In these alloy...
The isothermal cross section through the ternary phase diagram Nb–Ni–Cr at 1,100 °C was constructed ...
The isothermal cross section through the ternary phase diagram Nb–Ni–Cr at 1,100 °C was constructed ...
The isothermal cross section through the ternary phase diagram Nb–Ni–Cr at 1,100 °C was constructed ...
Co-Re-Cr alloys are being developed for high-temperature application in gas turbines. In these alloy...
The isothermal cross section through the ternary phase diagram Nb–Ni–Cr at 1,100 °C was constructed ...
In the present work, the phase equilibria of the Ni-Ga-Cr ternary system at 850, 1000 and 1150 °C we...
A significant number of diffusion barrier coatings have been proposed; however, after a relatively s...
In this study, the isothermal sections of the Co-Re-Ta ternary system at 1100, 1200, and 1300 °...
[[abstract]]The purpose of this study is to discuss the precipitation tendencies of δ, σ, and γ phas...
The thermal stability of multiphase intermetallics at temperatures to 1400°C was investigated by stu...