Add to ORKGThis paper presents an experimental study on wear and frictional properties of developed hybrid sisal/jute fibre reinforced epoxy composite. Composite are fabricated by hand lay-up technique keeping constant 30 wt. % of fibre content. Wear and frictional properties of hybrid composite is carried out at different operating parameters such as applied load (10-30 N), sliding speed (1-3m/s) and constant sliding distance 1000 m. Alkali treatment of fibres is used to increase the percentage reduction of wear rate and friction coefficient. The experimental results show that increase in specific wear rate and coefficient of friction is found on increasing the applied load and sliding speed.
Now-a-days, the natural fibres from renewable natural resources offer the potential to act as a rein...
Natural polymers reinforced with synthetic fibers such as glass, carbon, and aramid provide advantag...
In this study, hand lay-up technique was used to fabricate epoxy composite based on jut...
37-44<span style="font-size:11.0pt;font-family: " times="" new="" roman","serif";mso-fareast-font-f...
In this study, hand lay-up technique was used to fabricate epoxy composite based on jut...
The environmental issue has urged the researchers and scientists to emphasis considerable attention ...
500-504Effect of different stacking sequence of jute and flax fabrics on the tensile, water absorpti...
In this study, hand lay-up technique was used to fabricate epoxy composite based on jute fibre mates...
Effect of different stacking sequence of jute and flax fabrics onthe tensile, water absorption and w...
Effect of different stacking sequence of jute and flax fabrics onthe tensile, water absorption and w...
Effect of different stacking sequence of jute and flax fabrics onthe tensile, water absorption and w...
Effect of different stacking sequence of jute and flax fabrics onthe tensile, water absorption and w...
AbstractThe incorporation of natural fibres such as sisal/jute with glass fiber composites has gaine...
In the last few decades natural fiber composites has gained its importance due to its low cost and t...
256-261Natural fiber reinforced hybrid composite is developed to meet the environment friendly and s...
Now-a-days, the natural fibres from renewable natural resources offer the potential to act as a rein...
Natural polymers reinforced with synthetic fibers such as glass, carbon, and aramid provide advantag...
In this study, hand lay-up technique was used to fabricate epoxy composite based on jut...
37-44<span style="font-size:11.0pt;font-family: " times="" new="" roman","serif";mso-fareast-font-f...
In this study, hand lay-up technique was used to fabricate epoxy composite based on jut...
The environmental issue has urged the researchers and scientists to emphasis considerable attention ...
500-504Effect of different stacking sequence of jute and flax fabrics on the tensile, water absorpti...
In this study, hand lay-up technique was used to fabricate epoxy composite based on jute fibre mates...
Effect of different stacking sequence of jute and flax fabrics onthe tensile, water absorption and w...
Effect of different stacking sequence of jute and flax fabrics onthe tensile, water absorption and w...
Effect of different stacking sequence of jute and flax fabrics onthe tensile, water absorption and w...
Effect of different stacking sequence of jute and flax fabrics onthe tensile, water absorption and w...
AbstractThe incorporation of natural fibres such as sisal/jute with glass fiber composites has gaine...
In the last few decades natural fiber composites has gained its importance due to its low cost and t...
256-261Natural fiber reinforced hybrid composite is developed to meet the environment friendly and s...
Now-a-days, the natural fibres from renewable natural resources offer the potential to act as a rein...
Natural polymers reinforced with synthetic fibers such as glass, carbon, and aramid provide advantag...
In this study, hand lay-up technique was used to fabricate epoxy composite based on jut...