Pavement damage due to different tire and loading configurations on secondary roads.

Due to the large percentage of goods moved by commercial trucks and its ever-growing freight industry, the U.S. needs innovative technologies to improve the efficiency of trucking operations and ensure continuous growth of the economy. One example of such a technology is the introduction of wide-base single tires to replace conventional dual tire systems. After more than two decades of research powered mainly by the tire industry, a new generation of wide-base tire was recently introduced. Compared to the first generation of wide-base tires, these new tires offer safety and cost-savings characteristics. Despite the significant advancements achieved through previous research projects on the impcat of wide-base tires on pavements, past investigations have not evaluated the damage wide-base tires cause to low-volume secondary roads. This pavement class is widely encountered in many trucking applications, although for short distances, but the impact of the new generation of wide-base tires on these pavement structures is unclear. In addition, the static uniform loading assumption used in conventional flexible pavement design methods is inconsistent with realistic tire loading conditions and may result in erroneous pavement response and damage predictions. To address these shortcomings, this research project uses a developed three-dimensional (3-D) finite element model to predict pavement responses to loading applied by various tire configurations on secondary road pavements. This model incorporates the measured 3-D tire-pavement contact stresses, hot-mix asphalt (HMA) linear viscoelasticity, continuous moving load, and utilizes implicit dynamic analysis. The impact of wide-base tires on secondary road pavement damage was analyzed using available damage models, and the results were compared to the damage from conventional dual-tire assemblies