Hardness and elastic modulus profiles of hybrid coatings

Instrumented-indentation testing (IIT) provided with a continuous stiffness measurement (CSM) technique was employed to measure hardness and elastic modulus profiles of thin organic/inorganic hybrid coatings on glass surfaces. Hybrids were synthesized by the hydrolytic condensation of (3-methacryloxypropyl) trimethoxysilane (MPMS) or vinyltrimethoxysilane (VMS), with 5–30 wt% tetraethoxysilane (TEOS), in the presence of formic acid. Coatings of 600–800 nm on glass substrates were obtained by dip-coating solutions of these hybrids with benzoyl peroxide (BPO) addition, and curing in an oven following a thermal cycle up to 120∘C. Both hardness and elastic modulus showed a maximum value close to the surface, followed by a plateau and a significant increase at higher penetrations. Hybrids based on MPMS and 20–30 wt% TEOS exhibited a good combination of intrinsic values of hardness (0.50 GPa) and brittle index (0.06–0.07), that makes them suitable for coatings of plastic substrates.Fil: Hu, Lijiang. Harbin Institute Of Technology; ChinaFil: Zhang, Xingwen. Harbin Institute Of Technology; ChinaFil: Sun, Yi. Harbin Institute Of Technology; ChinaFil: Williams, Roberto Juan Jose. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentin