Mechanical properties of linseed oil monoglyceride maleate/styrene copolymers

In this study, rigid thermoset polymers were prepared from radical copolymerization of linseed oil monoglyceride maleates with styrene (St). First, linseed oil monoglycerides (LOMGs) were obtained from the reaction of linseed oil with glycerol at 220-240°C. Then, LOMGs were reacted with maleic anhydride at 80°C to produce the LOMG maleate half esters. The reactions were followed by FTIR spectroscopy and size exclusion chromatography (SEC) and the final resin was characterized by 1H-NMR spectroscopy. Finally, radical copolymerization of the LOMG maleates with 20,40,60, and 80% by weight of St was performed to produce rigid, thermoset polymers. The thermomechanical properties and fracture behavior of the cured copolymers, as a function of the percentage of St, were measured and analyzed. The copolymer with 40% by weight of St was the material with better mechanical and fracture behavior.Fil: Mosiewicki, Mirna Alejandra. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Aranguren, Mirta Ines. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Borrajo Fernandez, Julio. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentin