Development of automated test as failure confirmation of the central information car display

U ovom je diplomskom radu razvijen potpuno automatiziran test automobilskog zaslona kao potvrda pogreške te je isti integriran unutar alata za testnu automatizaciju (ATAT). Tijekom izrade rada razmatran je CID tip automobilskog zaslona. Komunikacija izme ¯ du ATAT-a i CID-a je uspostavljena preko Göpel VideoDragona s APIX linkom koji omogu´cuje prijenos podataka pomo´cu SomeIP i AShell komunikacijskih protokola. U ATAT-u je implementirano posebno suˇcelje kojim se ostvaruje precizna dijagnostika podataka na dubokoj razini, testiranje automobilskog zaslona u sintetiˇckom okruženju te automatizirana potvrde pogreške u testnoj fazi 1. Interakcije dodira potrebne za testiranje zaslona ostvarene su pomo´cu univerzalnog robota. Pokreti univerzalnog robota su vo ¯ deni Keyence video kamerom, a zapoˇcinju kada je na zaslonu prepoznata nova testna toˇcka pomo´cu sustava za prepoznavanje slike. Na taj je naˇcin realiziran reproducibilan i potpuno automatizirani test automobilskog zaslona.In this Master’s Thesis, the fully automated display test as failure confirmation was developed and was integrated in the Test Automation Tool (ATAT). The CID display type was considered during the work in laboratory. Communication between ATAT and CID was established over the Göpel VideoDragon with APIX link that offers data transmission over the SomeIP and AShell communication protocols. Special interface was implemented in ATAT to realize the precise display’s data diagnosis on deep level, display testing in a synthetic environment and automatization of the display’s failure confirmation of the Alpine’s test stage 1. Touch interactions required for the display tests were realized with the Universal Robot. Motions of the Universal Robot were guided by the Keyence video camera when the new testing point on the display’s screen was recognised by camera’s image recognition system. Thus, the reproducible and fully automated display test was realized