Purpose To perform the first dosimetric intercomparison for proton beams in Italy using ionization chambers, according to the IAEA TRS-398 code of practice. Methods Measurement sites included: National Center for Oncological Hadron Therapy (CNAO, Pavia), Center for Proton Therapy (CTP, Trento) and Center for Hadron Therapy and for advanced Nuclear Applications (CATANA, Catania). For comparison we also included a 6 MV photon beam produced at Istituti Clinici Scientifici Maugeri (ICSM, Pavia). For proton beams, both single pseudo-monoenergetic layers (in order to obtain a planned dose of 2 Gy at the reference depth of 2 cm in a water phantom) and Spread-out Bragg peaks (SOBP) have been delivered. Measurements were performed with a PTW Farmer ...
Purpose: The main purpose of this work is the inter-comparison between different devices devoted to ...
Five proton therapy facilities (HIBMC, Hyogo; NCCHE, Kashiwa; WERC, Tsuruga; PMRC, Tsukuba; SCC, Shi...
Since 1987, a dosimetric standardization process has been started by the Belgian Hospital Physicist ...
Purpose To perform the first dosimetric intercomparison for proton beams in Italy using ionization c...
Background and purpose: Methods for determining absorbed dose in clinical proton beams are based on ...
Background and purpose: A new protocol for calibration of proton beams was established by the ICRU i...
The formalism and data in the two most recent dosimetry recommendations for clinical proton beams, I...
A number of codes of practice (CoP) for electron and photon radiotherapy beam dosimetry are currentl...
IAEA TRS 398 [1] recommends that proton dosimetry using ionisation chambers be based on absorbed dos...
This paper presents guidelines for the calibration of radiation beams that were issued by the Intern...
Purpose: To describe the dosimetric commissioning and quality assurance (QA) of the actively scanned...
We present a new facility dedicated to radiobiology research, which has been implemented at the Tren...
PURPOSE: At the high dose-per-pulse rates used by some intraoperative radiotherapy (IORT) units, the...
Since 1987, a dosimetric standardization process has been started by the Belgian Hospital Physicist ...
Nation-wide proton dosimetry intercomparison was carried out involving new facilities in April 2008....
Purpose: The main purpose of this work is the inter-comparison between different devices devoted to ...
Five proton therapy facilities (HIBMC, Hyogo; NCCHE, Kashiwa; WERC, Tsuruga; PMRC, Tsukuba; SCC, Shi...
Since 1987, a dosimetric standardization process has been started by the Belgian Hospital Physicist ...
Purpose To perform the first dosimetric intercomparison for proton beams in Italy using ionization c...
Background and purpose: Methods for determining absorbed dose in clinical proton beams are based on ...
Background and purpose: A new protocol for calibration of proton beams was established by the ICRU i...
The formalism and data in the two most recent dosimetry recommendations for clinical proton beams, I...
A number of codes of practice (CoP) for electron and photon radiotherapy beam dosimetry are currentl...
IAEA TRS 398 [1] recommends that proton dosimetry using ionisation chambers be based on absorbed dos...
This paper presents guidelines for the calibration of radiation beams that were issued by the Intern...
Purpose: To describe the dosimetric commissioning and quality assurance (QA) of the actively scanned...
We present a new facility dedicated to radiobiology research, which has been implemented at the Tren...
PURPOSE: At the high dose-per-pulse rates used by some intraoperative radiotherapy (IORT) units, the...
Since 1987, a dosimetric standardization process has been started by the Belgian Hospital Physicist ...
Nation-wide proton dosimetry intercomparison was carried out involving new facilities in April 2008....
Purpose: The main purpose of this work is the inter-comparison between different devices devoted to ...
Five proton therapy facilities (HIBMC, Hyogo; NCCHE, Kashiwa; WERC, Tsuruga; PMRC, Tsukuba; SCC, Shi...
Since 1987, a dosimetric standardization process has been started by the Belgian Hospital Physicist ...