Muista lisätä OAP kun lopullinen ulos./Maria 16.12.19The thermal degradation of wood is affected by a number of process parameters, which may also cause variations in the resistance against decay fungi. This study compares changes in the chemical composition, water-related properties and decay resistance of Scots pine sapwood that was either thermally modified (TM) in dry state at elevated temperatures (≥ 185 °C) or treated in pressurized hot water at mild temperatures (≤ 170 °C). The thermal decomposition of easily degradable hemicelluloses reduced the mass loss caused by Rhodonia placenta, and it was suggested that the cumulative mass loss is a better indicator of an actual decay inhibition. Pressurized hot water extraction (HWE) did not ...
Thermal modified wood has some advantages over natural wood, including decreased hygroscopicity, inc...
International audienceEffect of heat treatment intensity on some conferred properties like elemental...
Heat treatment of wood at relatively high temperatures (in the range of 150-280 degrees C) is an eff...
Muista lisätä OAP kun lopullinen ulos./Maria 16.12.19The thermal degradation of wood is affected by ...
Funding Information: Research funding: Financial support from the Academy of Finland (grant no. 3098...
Thermal modification methods have been developed to increase the biological durability and dimension...
Thermal modification at elevated temperatures changes the chemical, biological and physical properti...
Heat-treatment changes the chemical and physical properties of wood. Wood polymers are degraded, dim...
Funding Information: Research funding: Financial support from the Academy of Finland (grant No. 3098...
Thermal modification has been developed for an industrial method to increase the biological durabili...
The efficiency of hot water extraction (HWE) is dependent on the size of treated wood. While previou...
Heat-treated and matched boards dried at 60°C of Scots pine (Pinus silvestris), Norway spruce (Picea...
Water absorption differences between sapwood and heartwood of Scots pine and Norway spruce heat-trea...
We analyzed the effects of heat treatment on the chemical structure of wood from narrow-leafed Ash (...
In this research, the effect of thermal modifications at 170°C, 190°C, 210°C and 230°C on the wettab...
Thermal modified wood has some advantages over natural wood, including decreased hygroscopicity, inc...
International audienceEffect of heat treatment intensity on some conferred properties like elemental...
Heat treatment of wood at relatively high temperatures (in the range of 150-280 degrees C) is an eff...
Muista lisätä OAP kun lopullinen ulos./Maria 16.12.19The thermal degradation of wood is affected by ...
Funding Information: Research funding: Financial support from the Academy of Finland (grant no. 3098...
Thermal modification methods have been developed to increase the biological durability and dimension...
Thermal modification at elevated temperatures changes the chemical, biological and physical properti...
Heat-treatment changes the chemical and physical properties of wood. Wood polymers are degraded, dim...
Funding Information: Research funding: Financial support from the Academy of Finland (grant No. 3098...
Thermal modification has been developed for an industrial method to increase the biological durabili...
The efficiency of hot water extraction (HWE) is dependent on the size of treated wood. While previou...
Heat-treated and matched boards dried at 60°C of Scots pine (Pinus silvestris), Norway spruce (Picea...
Water absorption differences between sapwood and heartwood of Scots pine and Norway spruce heat-trea...
We analyzed the effects of heat treatment on the chemical structure of wood from narrow-leafed Ash (...
In this research, the effect of thermal modifications at 170°C, 190°C, 210°C and 230°C on the wettab...
Thermal modified wood has some advantages over natural wood, including decreased hygroscopicity, inc...
International audienceEffect of heat treatment intensity on some conferred properties like elemental...
Heat treatment of wood at relatively high temperatures (in the range of 150-280 degrees C) is an eff...