Thin film growth and deposition of functional perovskite oxides

The research documented in this work focuses on the growth and deposition of thin film perovskite oxides for their electronic and photonic functionalities. The ever increasing demand for faster electronic devices, particularly in the realm of micro and nanoelectronics, is requiring diversification of the materials used in typical semiconductor-based integrated circuits. Metal oxides, particularly those in the perovskite family of materials, offers a wide range of functionalities that can both increase device performance and add new capabilities such as optical interconnects. The process in which perovskite oxide thin films are deposited and integrated with one another and conventional semiconductors can have many effects on the properties of the resulting device. This work explores these effects in the context of BaTiO₃ (BTO) and Ba [subscript x] Sr₁- [subscript x] TiO₃ (BST) second order nonlinear optical effects, which includes second harmonic generation (SHG) and the linear electro-optic effect (Pockels effect). The work also studies the growth effects on the apparent interfacial conductivity of LaTiO₃/SrTiO₃ (LTO/STO) heterostructures. BTO thin films grown epitaxially on STO(001) by molecular beam epitaxy (MBE) experience strain relaxation due to misfit dislocations for increasing thickness while epitaxial BST thin films remain strained at equivalent thicknesses due to the smaller lattice mismatch. These strained BST films exhibit larger second harmonic generation than relaxed BTO films, for particular compositions, suggesting that the epitaxial strain enhances their polarization and second order nonlinear susceptibility beyond what is capable in equivalently thick, relaxed BTO films. We also explore the deposition of BTO and BST thin films by a chemical solution method under atmospheric conditions. The films are epitaxial with STO(001) template layers prepared by MBE on Si(001) wafers. Presence of the Pockels effect is confirmed in the films, although optical hysteresis and remanent polarization is not observed owing to the films’ small (10-100 nm) grain size, structural defects, and residual tensile stress. Effective Pockels coefficients decrease monotonically with decreasing Ba composition. Non-zero Pockels response is observed in even Sr-rich films, which is explained by the tensile stress that deforms the normally cubic crystal structure into a non-centrosymmetric structure. Post-deposition annealing can increase the Pockels response by approximately four times and is attributed to an increase in grain size and the elimination of structural defects. Finally, we study the effects of oxygen vacancies caused by varying MBE growth conditions of LTO thin films on STO(001) single crystals and thin STO layers on Ge(001). Electrical conductivity of the heterostructures is LTO-thickness dependent, and LTO growth on STO/Ge structures requires orders of magnitude higher partial pressures of molecular oxygen in order to achieve crystalline LTO with proper oxidation states. This is explained by the propensity of LTO to scavenge oxygen from STO during growth, which is limited in LTO/STO/Ge heterostructures, and generates many free carriers and leads to the observed conductivity of the LTO/STO systems BTO thin films grown epitaxially on STO(001) by molecular beam epitaxy (MBE) experience strain relaxation due to misfit dislocations for increasing thickness while epitaxial BST thin films remain strained at equivalent thicknesses due to the smaller lattice mismatch. These strained BST films exhibit larger second harmonic generation than relaxed BTO films, for particular compositions, suggesting that the epitaxial strain enhances their polarization and second order nonlinear susceptibility beyond what is capable in equivalently thick, relaxed BTO films. We also explore the deposition of BTO and BST thin films by a chemical solution method under atmospheric conditions. The films are epitaxial with STO(001) template layers prepared by MBE on Si(001) wafers. Presence of the Pockels effect is confirmed in the films, although optical hysteresis and remanent polarization is not observed owing to the films’ small (10-100 nm) grain size, structural defects, and residual tensile stress. Effective Pockels coefficients decrease monotonically with decreasing Ba composition. Non-zero Pockels response is observed in even Sr-rich films, which is explained by the tensile stress that deforms the normally cubic crystal structure into a non-centrosymmetric structure. Post-deposition annealing can increase the Pockels response by approximately four times and is attributed to an increase in grain size and the elimination of structural defects. Finally, we study the effects of oxygen vacancies caused by varying MBE growth conditions of LTO thin films on STO(001) single crysals and thin STO layers on Ge(001). Electrical conductivity of the heterostructures is LTO-thickness dependent, and LTO growth on STO/Ge structures requires orders of magnitude higher partial pressures of molecular oxygen in order to achieve crystalline LTO with proper oxidation states. This is explained by the propensity of LTO to scavenge oxygen from STO during growth, which is limited in LTO/STO/Ge heterostructures, and generates many free carriers and leads to the observed conductivity of the LTO/STO systems.Chemical Engineerin