Single crystal plasticity parameters identification from residual imprint topography after nano-indentation

International audienceFundamental deformation mechanisms of FCC materials under indentation have been probed at the grain scale. Experimental tests have been conducted on large-grained annealed and coldworked polycrystalline nickel samples with a Berkovich indenter. Indentation axes have been chosen to be close to the three main crystallographic directions [001], [101] and [111]. Pile-ups and slip traces have been revealed around the residual imprints by analyzing topographic measurements obtained by atomic force microscopy. It is shown that the indenter orientation in each indentation plane drives pileups and slip traces which in turn contain precious information about the crystallographic orientation and the hardening state of the studied grain. Imprint topographies after pile-up formation therefore carry information that one can exploit to assess some intrinsic material properties at the grain scale. A 3D finite element modeling of the nano-indentation test at the grain scale has been developed, making use of crystal plasticity constitutive laws. Six different virtual materials having the same macroscopic behavior have been built. The simulation results show a good agreement with experimental tests and also a great pile-up sensitivity to interaction matrix components. These results pave the way to the interaction matrix identification using an inverse finite element method