Spatial Division Multiplexed Microwave Signal processing by selective grating inscription in homogeneous multicore fibers

[EN] The use of Spatial Division Multiplexing for Microwave Photonics signal processing is proposed and experimentally demonstrated, for the first time to our knowledge, based on the selective inscription of Bragg gratings in homogeneous multicore fibers. The fabricated devices behave as sampled true time delay elements for radiofrequency signals offering a wide range of operation possibilities within the same optical fiber. The key to processing flexibility comes from the implementation of novel multicavity configurations by inscribing a variety of different fiber Bragg gratings along the different cores of a 7-core fiber. This entails the development of the first fabrication method to inscribe high-quality gratings characterized by arbitrary frequency spectra and located in arbitrary longitudinal positions along the individual cores of a multicore fiber. Our work opens the way towards the development of unique compact fiber-based solutions that enable the implementation of a wide variety of 2D (spatial and wavelength diversity) signal processing functionalities that will be key in future fiber-wireless communications scenarios. We envisage that Microwave Photonics systems and networks will benefit from this technology in terms of compactness, operation versatility and performance stability.We thank Prof. Jose Capmany for the thoughtful discussions and recommendations that greatly contribute to this work. This research was supported by the Spanish MINECO Projects TEC2014-60378-C2-1-R and TEC2015-62520-ERC, the Valencian Research Excellency Award Program GVA PROMETEO 2013/012, the Spanish MECD FPU Scholarship (FPU13/04675) for J. Hervas, and the Spanish MINECO Ramon y Cajal Program (RYC-2014-16247) for I. Gasulla.Gasulla Mestre, I.; Barrera Vilar, D.; Hervás-Peralta, J.; Sales Maicas, S. (2017). Spatial Division Multiplexed Microwave Signal processing by selective grating inscription in homogeneous multicore fibers. Scientific Reports. 7(41727):1-10. https://doi.org/10.1038/srep41727110741727Samsung Electronics Co, “5G Vision”, available at http://www.samsung.com/global/business-images/insights/2015/Samsung-5G-Vision-0.pdf (2015).Technology Focus on Microwave Photonics. Nat. Photonics 5, 723 (2011).J. Capmany, J. Mora, I. Gasulla, J. Sancho, J. Lloret & S. Sales . Microwave photonic signal processing. IEEE J. Lightw. Technol. 31, 571–586 (2013).Y. Long & J. Wang . Ultra-high peak rejection notch microwave photonic filter using a single silicon microring resonator. Opt. Express 23, 17739–17750 (2015).Y. Long & J. Wang . All-optical tuning of a nonlinear silicon microring assisted microwave photonic filter: theory and experiment. Opt. Express 23, 17758–17771 (2015).Y. Long, L. Zhou & J. Wang . Photonic-assisted microwave signal multiplication and modulation using a silicon Mach–Zehnder modulator. Sci. Reports 6, 20215 (2016).J. Sancho, J. Bourderionnet, J. Lloret, S. Combrié, I. Gasulla, S. Xavier, S. Sales, P. Colman, G. Lehoucq, D. Dolfi, J. Capmany & A. De Rossi . Integrable microwave filter based on a photonic crystal delay line. Nat. Commun. 3, 1075 (2012).F. Ohman, K. Yvind & J. Mørk . Slow Light in a Semiconductor Waveguide for True-Time Delay Applications in Microwave Photonics. IEEE Photon. Technol. Lett. 19, 1145–1157 (2007).P. A. Morton & J. B. Khurgin. Microwave photonic delay line with separate tuning of the optical carrier. IEEE Photon. Technol. Lett. 21, 1686–1688 (2009).D. Marpaung, C. Roeloffzen, R. Heideman, A. Leinse, S. Sales & J. Capmany . Integrated microwave photonics. Lasers Photon. Rev. 7, 506–538 (2013).I. Gasulla & J. Capmany . Microwave photonics applications of multicore fibers. Photonics J. 4, 877–888 (2012).S. Garcia & I. Gasulla . Design of Heterogeneous Multicore fibers as sampled True Time Delay Lines. Opt. Lett. 40, 621–624 (2015).F. Zeng & J. Yao . All-optical microwave filters using uniform fiber Bragg gratings with identical reflectivities. IEEE J. Lightw. Technol. 23, 1410 (2005).C. Wang & J. Yao . Fiber Bragg gratings for microwave photonics subsystems. Opt. Express 21, 22868–22884 (2013).I. Gasulla, D. Barrera & S. Sales . Microwave photonic devices based on multicore fibers. 16th International Conference on Transparent Optical Networks (ICTON), Graz, Austria, 2014.I. Gasulla, D. Barrera, J. Hervás, S. García & S. Sales . Multi-cavity Microwave Photonics devices built upon multicore fibres. 18th International Conference on Transparent Optical Networks (ICTON), Trento (Italy), pp. 1–4, 2016.K. O. Hill & G. Meltz . Fiber Bragg grating technology fundamentals and overview. IEEE J. Lightw. Technol. 15, 1263–1276 (1997).T. Erdogan . Fiber grating spectra. IEEE J. Lightw. Technol. 15, 1277–1294 (1997).D. Barrera, I. Gasulla & S. Sales . Multipoint two-dimensional curvature optical fiber sensor based on a non-twisted homogeneous four-core fiber. IEEE J. Lightw. Technol. 33, 2445–2450 (2015).T. Birks, B. Mangan, A. Diez, J. Cruz, S. Leon-Saval, J. Bland-Hawthorn & D. Murphy . Multicore optical fibres for astrophotonics. In CLEO/Europe and EQEC 2011 Conference Digest, OSA Technical Digest (CD)d (Optical Society of America, 2011), paper JSIII2_1.C. Wang, Z. Yan, Q. Sun, Z. Sun, C. Mou, J. Zhang, A. Badmos & L. Zhang . Fibre Bragg gratings fabrication in four core fibres. Proc. SPIE 9886, Micro-Structured and Specialty Optical Fibres IV, 98860H (2016).M. J. Cole, W. H. Loh, R. I. Laming, M. N. Zervas & S. Barcelos . Moving fibre/phase mask-scanning beam technique for enhanced flexibility in producing fibre gratings with uniform phase mask. Electron. Lett. 31, 1488–1490 (1995).M. Gallagher & U. Österberg . Time resolved 3.10 eV luminescence in germanium-doped silica glass. Appl. Phys. Lett. 63, 2987–2988 (1993).T. Komukai & M. Nakazawa . Fabrication of high-quality long fiber Bragg grating by monitoring 3.1 eV radiation (400 nm) from GeO defects. IEEE Photon. Tech. Lett. 8, 1495–1497 (1996).R. R. Thomson, H. T. Bookey, N. D. Psaila, A. Fender, S. Campbell, W. N. MacPherson, J. S. Barton, D. T. Reid & A. K. Kar . Ultrafast-laser inscription of a three dimensional fan-out device for multicore fiber coupling applications. Opt. Express 15, 11691–11697 (2007)