Methodology for Thermal Behaviour Assessment of Homogeneous Façades in Heritage Buildings

[EN] It is fundamental to study the thermal behaviour in all architectural constructions throughout their useful life, in order to detect early deterioration ensuring durability, in addition to achieving and maintaining the interior comfort with the minimum energy consumption possible. This research has developed a methodology to assess the thermal behaviour of facades in heritage buildings. This paper presents methodology validation and verification (V & V) through a laboratory experiment. Guidelines and conclusions are extracted with the employment of three techniques in this experiment (thermal sensors, thermal imaging camera, and 3D thermal simulation in finite element software). A small portion of a homogeneous facade has been reproduced with indoor and outdoor thermal conditions. A closed chamber was constructed with wood panels and thermal insulation, leaving only one face exposed to the outside conditions, with a heat source inside the chamber that induces a temperature gradient in the wall. With this methodology, it is possible to better understand the thermal behaviour of the facade and to detect possible damage with the calibration and comparison of the results obtained by the experimental and theoretical techniques. This methodology can be extrapolated to the analysis of the thermal behaviour of facades in heritage buildings, usually made up of homogeneous material.Gil Benso, E.; Lerma Elvira, C.; Vercher Sanchis, JM.; Mas Tomas, MDLA. (2017). Methodology for Thermal Behaviour Assessment of Homogeneous Façades in Heritage Buildings. Journal of Sensors. 1-13. doi:10.1155/2017/328069111