Effect of reinforcement NbC phase on the mechanical properties of Al2O3-NbC nanocomposites obtained by spark plasma sintering

[EN] The sintering behavior of Al2O3-NbC nanocomposites fabricated via conventional and spark plasma sintering (SPS) was investigated. The nanometric powders of NbC were prepared by reactive high-energy milling, deagglomerated, leached with acid, added to the Al2O3 matrix in the proportion of 5vol% and dried under airflow. Then, the nanocomposite powders were densified at different temperatures, 1450-1600C. Effect of sintering temperature on the microstructure and mechanical properties such as hardness, toughness and bending strength were analyzed. The Al2O3-NbC nanocomposites obtained by SPS show full density and maximum hardness value>25GPa and bending strength of 532MPa at 1500C. Microstructure observations indicate that NbC nanoparticles are dispersed homogeneously within Al2O3 matrix and limit their grain growth. Scanning electron microscopy examination of the fracture surfaces of dense samples obtained at 1600C by SPS revealed partial melting of the particle surfaces due to the discharge effecThis work has been financial support by the Brazilian institution CAPES for the project CAPES-PVE A086/2013 (project no. 23038.009604/2013-12). A Borrell, acknowledges the Spanish Ministry of Economy and Competitiveness for her Juan de la Cierva-Incorporacion contract (IJCI-2014-19839).Ribeiro-Rodrigues Alecrim, L.; Ferreira, J.; Gutiérrez-González, C.; Salvador Moya, MD.; Borrell Tomás, MA.; Pallone, E. (2017). Effect of reinforcement NbC phase on the mechanical properties of Al2O3-NbC nanocomposites obtained by spark plasma sintering. International Journal of Refractory Metals and Hard Materials. 64:255-260. https://doi.org/10.1016/j.ijrmhm.2016.10.0212552606