Performance evaluation of a waste-heat driven adsorption system for automotive air-conditioning: Part II - Performance optimization under different real driving conditions

[EN] In this part, Part 11, of a two-part study, the validated model of part I is integrated into a general vehicle model in order to predict the performance of the system under real driving conditions. The overall model takes into account all the system components to simulate the dynamic performance of the entire system and predict the cabin temperature at the available waste heat. The system was implemented in a Fiat Grande Punto vehicle and the experimental tests were performed at the Centro Ricerche Fiat (CRF), Italy laboratories. Different design configurations were investigated to explore further improvements of the performance. Results showed that the model was able to well predict the transient performance of the system under different start-up and ambient conditions as well as the normal operating conditions. Using two radiators instead of one radiator increases the cooling capacity by 7.0% and decreases the cabin temperature by 9.1%. At the warming up period, the adsorption system faces serious difficulties to start producing the required cooling. Possible strategies to avoid this problem were studied and compared. In general, it has been proved that the amount of engine waste heat available is sufficient to produce enough cooling to keep reasonably comfortable temperatures in the cabin. (C) 2016 Elsevier Ltd. All rights reserved.This work has been partially supported by the Thermally Operated Mobile Air Conditioning Systems (TOPMACS). The authors are very grateful to the Energy Research Center of Netherlands (ECN) for their support with the experimental work.This work has been partially supported by the Thermally Operated Mobile Air Conditioning Systems (TOPMACS). The authors are very grateful to the Energy Research Center of Netherlands (ECN) for their support in the experimental work.Verde Trindade, M.; Harby Mohamed Abd Alaal, K.; De Boer, R.; Corberán, JM. (2016). Performance evaluation of a waste-heat driven adsorption system for automotive air-conditioning: Part II - Performance optimization under different real driving conditions. Energy. 115:996-1009. doi:10.1016/j.energy.2016.09.086996100911