Reusing fly ash in glass fibre reinforced cement: A new generation of high-quality GRC composites

[EN] New composite materials based on an alkali-resistant glass-fibre reinforced cement (AR-GRC) system are being developed by using fly ash (FA) produced at coal thermoelectric power plants, and fluid catalytic cracking catalyst residue (FC3R) from the petrol industry as cement replacement materials. These wastes are reactive from the pozzolanic viewpoint, and modify the nature and the microstructure of the cement matrix when a part of the Portland cement is replaced in the formulation of GRC. Several microstructural and mechanical aspects are being studied for AR-GRC systems. The behaviour of composites exposed to ageing shows that the pozzolanic activity of the ground FA added in high amounts and its mixture with the FOR increase the flexural strength and no evidences of strength decay are observed. Additionally, the fibres due to the high alkalinity of the cementing Matrix can be deteriorated. Fibres in the control (only Portland cement) and FOR containing composites were attacked, whereas composites with FA and their mixture with FC3R show that the fibres have not been attacked, due to the pozzolanic activity of replacing materials that reduce the calcium hydroxide content in the cementing matrix. (c) 2007 Elsevier Ltd. All rights reserved.Paya Bernabeu, JJ.; Bonilla Salvador, MM.; Borrachero Rosado, MV.; Monzó Balbuena, JM.; Peris Mora, E.; Lalinde Castrillón, LF. (2007). Reusing fly ash in glass fibre reinforced cement: A new generation of high-quality GRC composites. Waste Management. 27(10):1416-1421. doi:10.1016/j.wasman.2007.03.01414161421271