Biomimetic hydroxyapatite coating on pore walls improves osteointegration of poly(L-lactic acid) scaffolds

[EN] Polymer ceramic composites obtained as the result of a mineralization process hold great promise for the future of tissue engineering. Simulated body fluids (SBFs) are widely used for the mineralization of polymer scaffolds. In this work an exhaustive study with the aim of optimizing the mineralization process on a poly(L-lactic acid) (PLLA) macroporous scaffold has been performed. We observed that when an air plasma treatment is applied to the PLLA scaffold its hydroxyapatite nucleation ability is considerably improved. However, plasma treatment only allows apatite deposition on the surface of the scaffold but not in its interior. When a 5 wt % of synthetic hydroxyapatite (HAp) nanoparticles is mixed with PLLA a more abundant biomimetic hydroxyapatite layer grows inside the scaffold in SBF. The morphology, amount, and composition of the generated biomimetic hydroxyapatite layer on the pores surface have been analyzed. Large mineralization times are harmful to pure PLLA as it rapidly degrades and its elastic compression modulus significantly decreases. Degradation is retarded in the composite scaffolds because of the faster and extensive biomimetic apatite deposition and the role of HAp to control the pH. Mineralized scaffolds, covered by an apatite layer in SBF, were implanted in osteochondral lesions performed in the medial femoral condyle of healthy sheep. We observed that the presence of biomimetic hydroxyapatite on the pore s surface of the composite scaffold produces a better integration in the subchondral bone, in comparison to bare PLLA scaffolds.Contract grant sponsor: CIBER-BBN, VI National R&D&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, Instituto de Salud Carlos III with assistance from the European Regional Development FundDeplaine, H.; Lebourg, MM.; Ripalda, P.; Vidaurre Garayo, AJ.; Sanz-Ramos, P.; Mora, G.; Prósper, F.... (2013). Biomimetic hydroxyapatite coating on pore walls improves osteointegration of poly(L-lactic acid) scaffolds. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 101B(1):173-186. https://doi.org/10.1002/jbm.b.32831173186101B1Lee, K., Chan, C. K., Patil, N., & Goodman, S. B. (2009). Cell therapy for bone regeneration-Bench to bedside. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 89B(1), 252-263. doi:10.1002/jbm.b.31199Saito, N., & Takaoka, K. (2003). New synthetic biodegradable polymers as BMP carriers for bone tissue engineering. Biomaterials, 24(13), 2287-2293. doi:10.1016/s0142-9612(03)00040-1Hollinger, J. O., Winn, S., & Bonadio, J. (2000). Options for Tissue Engineering to Address Challenges of the Aging Skeleton. Tissue Engineering, 6(4), 341-350. doi:10.1089/107632700418065Vallet-Regí, M., & Ruiz-Hernández, E. (2011). Bioceramics: From Bone Regeneration to Cancer Nanomedicine. Advanced Materials, 23(44), 5177-5218. doi:10.1002/adma.201101586Fu, Q., Saiz, E., Rahaman, M. N., & Tomsia, A. P. (2011). Bioactive glass scaffolds for bone tissue engineering: state of the art and future perspectives. Materials Science and Engineering: C, 31(7), 1245-1256. doi:10.1016/j.msec.2011.04.022Van Landuyt, P., Li, F., Keustermans, J. P., Streydio, J. M., Delannay, F., & Munting, E. (1995). The influence of high sintering temperatures on the mechanical properties of hydroxylapatite. Journal of Materials Science: Materials in Medicine, 6(1), 8-13. doi:10.1007/bf00121239Chou, L., Marek, B., & Wagner, W. R. (1999). Effects of hydroxylapatite coating crystallinity on biosolubility, cell attachment efficiency and proliferation in vitro. Biomaterials, 20(10), 977-985. doi:10.1016/s0142-9612(98)00254-3Pati, F., Datta, P., Adhikari, B., Dhara, S., Ghosh, K., & Mohapatra, P. K. D. (2012). Collagen scaffolds derived from fresh water fish origin and their biocompatibility. Journal of Biomedical Materials Research Part A, 100A(4), 1068-1079. doi:10.1002/jbm.a.33280GONG, Y., ZHOU, Q., GAO, C., & SHEN, J. (2007). In vitro and in vivo degradability and cytocompatibility of poly(l-lactic acid) scaffold fabricated by a gelatin particle leaching method. Acta Biomaterialia, 3(4), 531-540. doi:10.1016/j.actbio.2006.12.008Ishii, D., Ying, T. H., Mahara, A., Murakami, S., Yamaoka, T., Lee, W., & Iwata, T. (2009). In Vivo Tissue Response and Degradation Behavior of PLLA and Stereocomplexed PLA Nanofibers. Biomacromolecules, 10(2), 237-242. doi:10.1021/bm8009363Lee, B. N., Kim, D. Y., Kang, H. J., Kwon, J. S., Park, Y. H., Chun, H. J., … Kim, M. S. (2012). In vivo biofunctionality comparison of different topographic PLLA scaffolds. Journal of Biomedical Materials Research Part A, 100A(7), 1751-1760. doi:10.1002/jbm.a.34135Boccaccini, A. R., Erol, M., Stark, W. J., Mohn, D., Hong, Z., & Mano, J. F. (2010). Polymer/bioactive glass nanocomposites for biomedical applications: A review. Composites Science and Technology, 70(13), 1764-1776. doi:10.1016/j.compscitech.2010.06.002Li, D., Ye, C., Zhu, Y., Gou, Z., & Gao, C. (2012). Enhancement of osteogenesis by poly(lactide-co-glycolide) sponges loaded with surface-embedded hydroxyapatite particles and rhBMP-2. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 100B(4), 1103-1113. doi:10.1002/jbm.b.32677Kitsugi, T., Yamamuro, T., Nakamura, T., Higashi, S., Kakutani, Y., Hyakuna, K., … Shibuya, T. (1986). Bone bonding behavior of three kinds of apatite containing glass ceramics. Journal of Biomedical Materials Research, 20(9), 1295-1307. doi:10.1002/jbm.820200906Palmer, L. C., Newcomb, C. J., Kaltz, S. R., Spoerke, E. D., & Stupp, S. I. (2008). Biomimetic Systems for Hydroxyapatite Mineralization Inspired By Bone and Enamel. Chemical Reviews, 108(11), 4754-4783. doi:10.1021/cr8004422Kim, H. J., Kim, U.-J., Kim, H. S., Li, C., Wada, M., Leisk, G. G., & Kaplan, D. L. (2008). Bone tissue engineering with premineralized silk scaffolds. Bone, 42(6), 1226-1234. doi:10.1016/j.bone.2008.02.007Davis, H. E., Case, E. M., Miller, S. L., Genetos, D. C., & Leach, J. K. (2011). Osteogenic response to BMP-2 of hMSCs grown on apatite-coated scaffolds. Biotechnology and Bioengineering, 108(11), 2727-2735. doi:10.1002/bit.23227Jiao, Y., Liu, Z., Zhou, C., & Cui, F. (2007). Formation of bone-like apatite on poly(L-lactide) to improve osteoblast-like compatibility in vitro and in vivo. Frontiers of Materials Science in China, 1(2), 140-146. doi:10.1007/s11706-007-0025-xLee, T.-J., Kang, S.-W., Bhang, S. H., Kang, J. M., & Kim, B.-S. (2010). Apatite-Coated Porous Poly(lactic-co-glycolic acid) Microspheres as an Injectable Bone Substitute. Journal of Biomaterials Science, Polymer Edition, 21(5), 635-645. doi:10.1163/156856209x434656WANG, H., JI, J., ZHANG, W., ZHANG, Y., JIANG, J., WU, Z., … CHU, P. (2009). Biocompatibility and bioactivity of plasma-treated biodegradable poly(butylene succinate). Acta Biomaterialia, 5(1), 279-287. doi:10.1016/j.actbio.2008.07.017Prasertsung, I., Mongkolnavin, R., Kanokpanont, S., & Damrongsakkul, S. (2010). The effects of pulsed inductively coupled plasma (PICP) on physical properties and biocompatibility of crosslinked gelatin films. International Journal of Biological Macromolecules, 46(1), 72-78. doi:10.1016/j.ijbiomac.2009.11.001Yildirim, E. D., Ayan, H., Vasilets, V. N., Fridman, A., Guceri, S., & Sun, W. (2008). Effect of Dielectric Barrier Discharge Plasma on the Attachment and Proliferation of Osteoblasts Cultured over Poly(ɛ-caprolactone) Scaffolds. Plasma Processes and Polymers, 5(1), 58-66. doi:10.1002/ppap.200700041Lebourg, M., Antón, J. S., & Ribelles, J. L. G. (2009). Hybrid structure in PCL-HAp scaffold resulting from biomimetic apatite growth. Journal of Materials Science: Materials in Medicine, 21(1), 33-44. doi:10.1007/s10856-009-3838-6Ho, M.-H., Kuo, P.-Y., Hsieh, H.-J., Hsien, T.-Y., Hou, L.-T., Lai, J.-Y., & Wang, D.-M. (2004). Preparation of porous scaffolds by using freeze-extraction and freeze-gelation methods. Biomaterials, 25(1), 129-138. doi:10.1016/s0142-9612(03)00483-6Müller, L., & Müller, F. A. (2006). Preparation of SBF with different HCO3- content and its influence on the composition of biomimetic apatites. Acta Biomaterialia, 2(2), 181-189. doi:10.1016/j.actbio.2005.11.001Deplaine, H., Ribelles, J. L. G., & Ferrer, G. G. (2010). Effect of the content of hydroxyapatite nanoparticles on the properties and bioactivity of poly(l-lactide) – Hybrid membranes. Composites Science and Technology, 70(13), 1805-1812. doi:10.1016/j.compscitech.2010.06.009Lebourg, M., Antón, J. S., & Ribelles, J. L. G. (2008). Porous membranes of PLLA–PCL blend for tissue engineering applications. European Polymer Journal, 44(7), 2207-2218. doi:10.1016/j.eurpolymj.2008.04.033Santamaría, V. A., Deplaine, H., Mariggió, D., Villanueva-Molines, A. R., García-Aznar, J. M., Ribelles, J. L. G., … Ochoa, I. (2012). Influence of the macro and micro-porous structure on the mechanical behavior of poly(l-lactic acid) scaffolds. Journal of Non-Crystalline Solids, 358(23), 3141-3149. doi:10.1016/j.jnoncrysol.2012.08.001Vallés Lluch, A., Ferrer, G. G., & Pradas, M. M. (2009). Surface modification of P(EMA-co-HEA)/SiO2 nanohybrids for faster hydroxyapatite deposition in simulated body fluid? Colloids and Surfaces B: Biointerfaces, 70(2), 218-225. doi:10.1016/j.colsurfb.2008.12.027Gibson, L. J., & Ashby, M. F. (1997). Cellular Solids. doi:10.1017/cbo9781139878326Zhang, R., & Ma, P. X. (1999). Porous poly(L-lactic acid)/apatite composites created by biomimetic process. Journal of Biomedical Materials Research, 45(4), 285-293. doi:10.1002/(sici)1097-4636(19990615)45:43.0.co;2-2Chen, J., Chu, B., & Hsiao, B. S. (2006). Mineralization of hydroxyapatite in electrospun nanofibrous poly(L-lactic acid) scaffolds. Journal of Biomedical Materials Research Part A, 79A(2), 307-317. doi:10.1002/jbm.a.30799Yang, C., Cheng, K., Weng, W., & Yang, C. (2008). OTS-modified HA and its toughening effect on PLLA/HA porous composite. Journal of Materials Science: Materials in Medicine, 20(3), 667-672. doi:10.1007/s10856-008-3604-1Bourque, H., Laurin, I., Pézolet, M., Klass, J. M., Lennox, R. B., & Brown, G. R. (2001). Investigation of the Poly(l-lactide)/Poly(d-lactide) Stereocomplex at the Air−Water Interface by Polarization Modulation Infrared Reflection Absorption Spectroscopy†. Langmuir, 17(19), 5842-5849. doi:10.1021/la0009792Yasuniwa, M., Tsubakihara, S., Iura, K., Ono, Y., Dan, Y., & Takahashi, K. (2006). Crystallization behavior of poly(l-lactic acid). Polymer, 47(21), 7554-7563. doi:10.1016/j.polymer.2006.08.054Garlotta, D. (2001). Journal of Polymers and the Environment, 9(2), 63-84. doi:10.1023/a:1020200822435Koutsopoulos, S. (2002). Synthesis and characterization of hydroxyapatite crystals: A review study on the analytical methods. Journal of Biomedical Materials Research, 62(4), 600-612. doi:10.1002/jbm.10280Oliveira, A. (2003). Sodium silicate gel as a precursor for the in vitro nucleation and growth of a bone-like apatite coating in compact and porous polymeric structures. Biomaterials, 24(15), 2575-2584. doi:10.1016/s0142-9612(03)00060-7Li, J., Zhu, D., Yin, J., Liu, Y., Yao, F., & Yao, K. (2010). Formation of nano-hydroxyapatite crystal in situ in chitosan–pectin polyelectrolyte complex network. Materials Science and Engineering: C, 30(6), 795-803. doi:10.1016/j.msec.2010.03.011Qu, X., Cui, W., Yang, F., Min, C., Shen, H., Bei, J., & Wang, S. (2007). The effect of oxygen plasma pretreatment and incubation in modified simulated body fluids on the formation of bone-like apatite on poly(lactide-co-glycolide) (70/30). Biomaterials, 28(1), 9-18. doi:10.1016/j.biomaterials.2006.08.024Lu, X., & Leng, Y. (2005). Theoretical analysis of calcium phosphate precipitation in simulated body fluid. Biomaterials, 26(10), 1097-1108. doi:10.1016/j.biomaterials.2004.05.034Kokubo, T., & Takadama, H. (2006). How useful is SBF in predicting in vivo bone bioactivity? Biomaterials, 27(15), 2907-2915. doi:10.1016/j.biomaterials.2006.01.017Hong, Z., Reis, R. L., & Mano, J. F. (2008). Preparation and in vitro characterization of scaffolds of poly(l-lactic acid) containing bioactive glass ceramic nanoparticles. Acta Biomaterialia, 4(5), 1297-1306. doi:10.1016/j.actbio.2008.03.007Rezwan, K., Chen, Q. Z., Blaker, J. J., & Boccaccini, A. R. (2006). Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering. Biomaterials, 27(18), 3413-3431. doi:10.1016/j.biomaterials.2006.01.039Budyanto, L., Goh, Y. Q., & Ooi, C. P. (2008). Fabrication of porous poly(L-lactide) (PLLA) scaffolds for tissue engineering using liquid–liquid phase separation and freeze extraction. Journal of Materials Science: Materials in Medicine, 20(1), 105-111. doi:10.1007/s10856-008-3545-8Zhang, R., & Ma, P. X. (1999). Poly(?-hydroxyl acids)/hydroxyapatite porous composites for bone-tissue engineering. I. Preparation and morphology. Journal of Biomedical Materials Research, 44(4), 446-455. doi:10.1002/(sici)1097-4636(19990315)44:43.0.co;2-fWei, G., & Ma, P. X. (2004). Structure and properties of nano-hydroxyapatite/polymer composite scaffolds for bone tissue engineering. Biomaterials, 25(19), 4749-4757. doi:10.1016/j.biomaterials.2003.12.005Šupová, M. (2009). Problem of hydroxyapatite dispersion in polymer matrices: a review. Journal of Materials Science: Materials in Medicine, 20(6), 1201-1213. doi:10.1007/s10856-009-3696-2Wang, T., Chow, L. C., Frukhtbeyn, S. A., Ting, A. H., Dong, Q., Yang, M., & Mitchell, J. W. (2011). Improve the strength of PLA/HA composite through the use of surface initiated polymerization and phosphonic acid coupling agent. Journal of Research of the National Institute of Standards and Technology, 116(5), 785. doi:10.6028/jres.116.021Kang, Y., Xu, X., Yin, G., Chen, A., Liao, L., Yao, Y., … Liao, X. (2007). A comparative study of the in vitro degradation of poly(l-lactic acid)/β-tricalcium phosphate scaffold in static and dynamic simulated body fluid. European Polymer Journal, 43(5), 1768-1778. doi:10.1016/j.eurpolymj.2007.02.043Ehrenfried, L. M., Farrar, D., & Cameron, R. E. (2009). Degradation Properties of Co-Continuous Calcium−Phosphate−Polyester Composites. Biomacromolecules, 10(7), 1976-1985. doi:10.1021/bm900397dEhrenfried, L. M., Patel, M. H., & Cameron, R. E. (2007). The effect of tri-calcium phosphate (TCP) addition on the degradation of polylactide-co-glycolide (PLGA). Journal of Materials Science: Materials in Medicine, 19(1), 459-466. doi:10.1007/s10856-006-0061-6Agrawal, C. M., & Athanasiou, K. A. (1997). Technique to control pH in vicinity of biodegrading PLA-PGA implants. Journal of Biomedical Materials Research, 38(2), 105-114. doi:10.1002/(sici)1097-4636(199722)38:23.0.co;2-uRainer, A., Spadaccio, C., Sedati, P., De Marco, F., Carotti, S., Lusini, M., … Trombetta, M. (2011). Electrospun Hydroxyapatite-Functionalized PLLA Scaffold: Potential Applications in Sternal Bone Healing. Annals of Biomedical Engineering, 39(7), 1882-1890. doi:10.1007/s10439-011-0289-2Niu, X., Fan, Y., Liu, X., Li, X., Li, P., Wang, J., … Feng, Q. (2011). Repair of Bone Defect in Femoral Condyle Using Microencapsulated Chitosan, Nanohydroxyapatite/Collagen and Poly(L-Lactide)-Based Microsphere-Scaffold Delivery System. Artificial Organs, 35(7), E119-E128. doi:10.1111/j.1525-1594.2011.01274.xLi, J., Hong, J., Zheng, Q., Guo, X., Lan, S., Cui, F., … Chen, C. (2011). Repair of rat cranial bone defects with nHAC/PLLA and BMP-2-related peptide or rhBMP-2. Journal of Orthopaedic Research, 29(11), 1745-1752. doi:10.1002/jor.21439Cai, Y. Z., Wang, L. L., Cai, H. X., Qi, Y. Y., Zou, X. H., & Ouyang, H. W. (2010). Electrospun nanofibrous matrix improves the regeneration of dense cortical bone. Journal of Biomedical Materials Research Part A, 95A(1), 49-57. doi:10.1002/jbm.a.32816Coraça, D. C., Duek, E. A. R., Padovani, C. A., & Camilli, J. A. (2008). Osteointegration of poly(l-lactic acid)PLLA and poly(l-lactic acid)PLLA/poly(ethylene oxide)PEO implants in rat tibiae. Journal of Materials Science: Materials in Medicine, 19(7), 2699-2704. doi:10.1007/s10856-008-3397-2Huang, X., Yang, D., Yan, W., Shi, Z., Feng, J., Gao, Y., … Yan, S. (2007). Osteochondral repair using the combination of fibroblast growth factor and amorphous calcium phosphate/poly(l-lactic acid) hybrid materials. Biomaterials, 28(20), 3091-3100. doi:10.1016/j.biomaterials.2007.03.017Schofer, M. D., Veltum, A., Theisen, C., Chen, F., Agarwal, S., Fuchs-Winkelmann, S., & Paletta, J. R. J. (2011). Functionalisation of PLLA nanofiber scaffolds using a possible cooperative effect between collagen type I and BMP-2: impact on growth and osteogenic differentiation of human mesenchymal stem cells. Journal of Materials Science: Materials in Medicine, 22(7), 1753-1762. doi:10.1007/s10856-011-4341-4Whited, B. M., Whitney, J. R., Hofmann, M. C., Xu, Y., & Rylander, M. N. (2011). Pre-osteoblast infiltration and differentiation in highly porous apatite-coated PLLA electrospun scaffolds. Biomaterials, 32(9), 2294-2304. doi:10.1016/j.biomaterials.2010.12.003Schofer, M. D., Boudriot, U., Leifeld, I., Sütterlin, R. I., Rudisile, M., Wendorff, J. H., … Fuchs-Winkelmann, S. (2009). Characterization of a PLLA-Collagen I Blend Nanofiber Scaffold with Respect to Growth and Osteogenic Differentiation of Human Mesenchymal Stem Cells. The Scientific World JOURNAL, 9, 118-129. doi:10.1100/tsw.2009.13Vayssade, M. (2009). Stromal cells. Frontiers in Bioscience, Volume(14), 210. doi:10.2741/3241Spadaccio, C., Rainer, A., Trombetta, M., Vadalá, G., Chello, M., Covino, E., … Genovese, J. A. (2009). Poly-l-Lactic Acid/Hydroxyapatite Electrospun Nanocomposites Induce Chondrogenic Differentiation of Human MSC. Annals of Biomedical Engineering, 37(7), 1376-1389. doi:10.1007/s10439-009-9704-3Lin, L., Chow, K. L., & Leng, Y. (2009). Study of hydroxyapatite osteoinductivity with an osteogenic differentiation of mesenchymal stem cells. Journal of Biomedical Materials Research Part A, 89A(2), 326-335. doi:10.1002/jbm.a.31994Chen, F., Lam, W. M., Lin, C. J., Qiu, G. X., Wu, Z. H., Luk, K. D. K., & Lu, W. W. (2007). Biocompatibility of electrophoretical deposition of nanostructured hydroxyapatite coating on roughen titanium surface:In vitroevaluation using mesenchymal stem cells. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 82B(1), 183-191. doi:10.1002/jbm.b.3072