Low-Loss and Compact Silicon Rib Waveguide Bends

[EN] Waveguide bends support intrinsically leaky propagation modes due to unavoidable radiation losses. It is known that the losses of deep-etched/strip waveguide bends increase inevitably for decreasing radius. Here, we theoretically and experimentally demonstrate that this result is not directly applicable to shallow-etched/rib waveguide bends. Indeed, we show that the total losses caused by the bends reach a local minimum value for a certain range of compact radii and rib waveguide dimensions. Specifically, we predicted the minimum intrinsic losses < 0.1 dB/90 degrees turn within the range of 25-30 mu m bend radii in a 220 nm-thick and 400 nm-wide silicon rib waveguide with 70 nm etching depth. This unexpected outcome, confirmed by experimental evidence, is due to the opposite evolution of radiation (bending) losses and losses caused by the coupling to lateral slab modes (slab leakage) as a function of the bend radius, hence creating an optimum loss region. This result may have important implications for the design of compact and low-loss silicon nanophotonic devices.This work was supported in part by the European STREP Program under Grant FP7-ICT-2013-11-619456-SITOGA and Grant FP7-ICT-2012-10-318240 PhoxTroT and in part by LEOMIS under Grant TEC2012-38540. (Corresponding author: Regis Orobtchouk.)Brimont, ACJ.; Hu, X.; Cueff, S.; Rojo-Romeo, P.; Saint Girons, G.; Griol Barres, A.; Zanzi, A.... (2016). Low-Loss and Compact Silicon Rib Waveguide Bends. IEEE Photonics Technology Letters. 28(3):299-302. https://doi.org/10.1109/LPT.2015.249523029930228