Stabilized hierarchical USY zeolite catalysts for simultaneous increase in diesel and LPG olefinicity during catalytic cracking

Hierarchical USY zeolites obtained by scalable and affordable post-synthetic modifications (PSM) are stabilized by means of REO ion exchange and/or hydrothermal treatments, leading to FCC catalysts with improved hydrothermal stability, increased bottoms conversion capacity and improved product selectivity, as compared to a conventional commercial USY based catalyst of comparable activity. The stabilized mesoporous USY yields more and better quality diesel with a reduced content of polyaromatic compounds, while producing lower amounts of gases but with a LPG fraction enriched in propene and butenes. The obtained selectivity slate is attributed to the combination of appropriate Bronsted acidity and reduced diffusion pathway in the zeolite crystals. A detailed characterization relates the physicochemical, textural and morphological changes induced by the PSM to the resulting catalytic behavior.The authors acknowledge financial support from the Spanish Government MINECO, Consolider Ingenio 2010 (project MUL-TICAT). The Swiss National Science Foundation (Project Number 200021-134572) is acknowledged.Martínez, C.; Verboekend, D.; Pérez-Ramírez, J.; Corma Canós, A. (2013). Stabilized hierarchical USY zeolite catalysts for simultaneous increase in diesel and LPG olefinicity during catalytic cracking. Catalysis Science and Technology. 3(4):972-981. doi:10.1039/c2cy20688a97298134Corma, A., & Wojciechowski, B. W. (1985). The Chemistry of Catalytic Cracking. Catalysis Reviews, 27(1), 29-150. doi:10.1080/01614948509342358Dwyer, J., Millward, D., O’Malley, P. J., Araya, A., Corma, A., Fornes, V., & Martinez, A. (1990). Synthesis of ZSM-20. Comparison of properties with zeolite Y. Journal of the Chemical Society, Faraday Transactions, 86(6), 1001. doi:10.1039/ft9908601001Haas, A., Harding, D. ., & Nee, J. R. . (1999). FCC catalysts containing the high-silica faujasites EMO and EMT for gas-oil cracking. Microporous and Mesoporous Materials, 28(2), 325-333. doi:10.1016/s1387-1811(98)00247-9Corma, A., Díaz-Cabañas, M. J., Martínez-Triguero, J., Rey, F., & Rius, J. (2002). A large-cavity zeolite with wide pore windows and potential as an oil refining catalyst. Nature, 418(6897), 514-517. doi:10.1038/nature00924Corma, A., Díaz-Cabañas, M. J., Jordá, J. L., Martínez, C., & Moliner, M. (2006). High-throughput synthesis and catalytic properties of a molecular sieve with 18- and 10-member rings. Nature, 443(7113), 842-845. doi:10.1038/nature05238ARRIBAS, J. (1987). Influence of framework aluminum gradients on the catalytic activity of Y zeolites: Cracking of gas-oil on Y zeolites dealuminated by different procedures. Journal of Catalysis, 108(1), 135-142. doi:10.1016/0021-9517(87)90160-6Corma, A., Fornés, V., Martínez, A., & Orchillés, A. V. (1988). Parameters in Addition to the Unit Cell That Determine the Cracking Activity and Selectivity of Dealuminated HY Zeolites. Perspectives in Molecular Sieve Science, 542-554. doi:10.1021/bk-1988-0368.ch035Camblor, M. A., Corma, A., Martínez, A., Mocholí, F. A., & Pariente, J. P. (1989). Catalytic cracking of gasoil. Applied Catalysis, 55(1), 65-74. doi:10.1016/s0166-9834(00)82317-9Chen, N. Y., Mitchell, T. O., Olson, D. H., & Pelrine, B. P. (1977). Irreversible Deactivation of Zeolite Fluid Cracking Catalyst. 2. Hydrothermal Stability of Catalysts Containing NH4Y and Rare Earth Y. Industrial & Engineering Chemistry Product Research and Development, 16(3), 247-252. doi:10.1021/i360063a012Sanchez-Castillo, M. A., Madon, R. J., & Dumesic, J. A. (2005). Role of Rare Earth Cations in Y Zeolite for Hydrocarbon Cracking†. The Journal of Physical Chemistry B, 109(6), 2164-2175. doi:10.1021/jp0489875Pérez-Ramírez, J., Christensen, C. H., Egeblad, K., Christensen, C. H., & Groen, J. C. (2008). Hierarchical zeolites: enhanced utilisation of microporous crystals in catalysis by advances in materials design. Chemical Society Reviews, 37(11), 2530. doi:10.1039/b809030kEgeblad, K., Christensen, C. H., Kustova, M., & Christensen, C. H. (2008). Templating Mesoporous Zeolites†. Chemistry of Materials, 20(3), 946-960. doi:10.1021/cm702224pSerrano, D. P., Aguado, J., & Escola, J. M. (s. f.). Hierarchical zeolites: materials with improved accessibility and enhanced catalytic activity. Catalysis, 253-283. doi:10.1039/9781849732772-00253Lopez-Orozco, S., Inayat, A., Schwab, A., Selvam, T., & Schwieger, W. (2011). Zeolitic Materials with Hierarchical Porous Structures. Advanced Materials, 23(22-23), 2602-2615. doi:10.1002/adma.201100462Van Donk, S., Janssen, A. H., Bitter, J. H., & de Jong, K. P. (2003). Generation, Characterization, and Impact of Mesopores in Zeolite Catalysts. Catalysis Reviews, 45(2), 297-319. doi:10.1081/cr-120023908Hartmann, M. (2004). Hierarchical Zeolites: A Proven Strategy to Combine Shape Selectivity with Efficient Mass Transport. Angewandte Chemie International Edition, 43(44), 5880-5882. doi:10.1002/anie.200460644Schmidt, W. (2009). Solid Catalysts on the Nanoscale: Design of Complex Morphologies and Pore Structures. ChemCatChem, 1(1), 53-67. doi:10.1002/cctc.200900125Chal, R., Gérardin, C., Bulut, M., & van Donk, S. (2010). Overview and Industrial Assessment of Synthesis Strategies towards Zeolites with Mesopores. ChemCatChem, 3(1), 67-81. doi:10.1002/cctc.201000158Holm, M. S., Taarning, E., Egeblad, K., & Christensen, C. H. (2011). Catalysis with hierarchical zeolites. Catalysis Today, 168(1), 3-16. doi:10.1016/j.cattod.2011.01.007Lei, Q., Zhao, T., Li, F., Zhang, L., & Wang, Y. (2006). Catalytic cracking of large molecules over hierarchical zeolites. Chemical Communications, (16), 1769. doi:10.1039/b600547kGarcía-Martínez, J., Johnson, M., Valla, J., Li, K., & Ying, J. Y. (2012). Mesostructured zeolite Y—high hydrothermal stability and superior FCC catalytic performance. Catalysis Science & Technology, 2(5), 987. doi:10.1039/c2cy00309kDessau, R. M., Valyocsik, E. W., & Goeke, N. H. (1992). Aluminum zoning in ZSM-5 as revealed by selective silica removal. Zeolites, 12(7), 776-779. doi:10.1016/0144-2449(92)90049-uDoremieux-Morin, C., Ramsaran, A., Le Van Mao, R., Batamack, P., Heeribout, L., Semmer, V., … Fraissard, J. (1995). 1H broad-line and MAS NMR: application to the study of acid sites of desilicated zeolite ZSM-5. Catalysis Letters, 34(1-2), 139-149. doi:10.1007/bf00808330Le Van Mao, R., Le, S. T., Ohayon, D., Caillibot, F., Gelebart, L., & Denes, G. (1997). Modification of the micropore characteristics of the desilicated ZSM-5 zeolite by thermal treatment. Zeolites, 19(4), 270-278. doi:10.1016/s0144-2449(97)00084-5Čimek, A., Subotić, B., Šmit, I., Tonejc, A., Aiello, R., Crea, F., & Nastro, A. (1997). Dissolution of high-silica zeolites in alkaline solutions II. Dissolution of ‘activated’ silicalite-1 and ZSM-5 with different aluminum content. Microporous Materials, 8(3-4), 159-169. doi:10.1016/s0927-6513(96)00082-xOhayon, D., Le Van Mao, R., Ciaravino, D., Hazel, H., Cochennec, A., & Rolland, N. (2001). Methods for pore size engineering in ZSM-5 zeolite. Applied Catalysis A: General, 217(1-2), 241-251. doi:10.1016/s0926-860x(01)00611-1Pérez-Ramírez, J., Mitchell, S., Verboekend, D., Milina, M., Michels, N.-L., Krumeich, F., … Erdmann, M. (2011). Expanding the Horizons of Hierarchical Zeolites: Beyond Laboratory Curiosity towards Industrial Realization. ChemCatChem, 3(11), 1731-1734. doi:10.1002/cctc.201100264Verboekend, D., & Pérez-Ramírez, J. (2011). Design of hierarchical zeolite catalysts by desilication. Catalysis Science & Technology, 1(6), 879. doi:10.1039/c1cy00150gDe Jong, K. P., Zečević, J., Friedrich, H., de Jongh, P. E., Bulut, M., van Donk, S., … Fajula, F. (2010). Zeolite Y Crystals with Trimodal Porosity as Ideal Hydrocracking Catalysts. Angewandte Chemie International Edition, 49(52), 10074-10078. doi:10.1002/anie.201004360Verboekend, D., Vilé, G., & Pérez-Ramírez, J. (2011). Hierarchical Y and USY Zeolites Designed by Post-Synthetic Strategies. Advanced Functional Materials, 22(5), 916-928. doi:10.1002/adfm.201102411Al-Sabawi, M., Chen, J., & Ng, S. (2012). Fluid Catalytic Cracking of Biomass-Derived Oils and Their Blends with Petroleum Feedstocks: A Review. Energy & Fuels, 26(9), 5355-5372. doi:10.1021/ef3006417Huber, G. W., Iborra, S., & Corma, A. (2006). Synthesis of Transportation Fuels from Biomass: Chemistry, Catalysts, and Engineering. Chemical Reviews, 106(9), 4044-4098. doi:10.1021/cr068360dCorma, A., Martínez, C., & Sauvanaud, L. (2007). New materials as FCC active matrix components for maximizing diesel (light cycle oil, LCO) and minimizing its aromatic content. Catalysis Today, 127(1-4), 3-16. doi:10.1016/j.cattod.2007.03.056Klinowski, J., Thomas, J. M., Fyfe, C. A., & Gobbi, G. C. (1982). Monitoring of structural changes accompanying ultrastabilization of faujasitic zeolite catalysts. Nature, 296(5857), 533-536. doi:10.1038/296533a0Fyfe, C. A., Bretherton, J. L., & Lam, L. Y. (2000). Detection of the ‘invisible aluminium’ and characterisation of the multiple aluminium environments in zeolite USY by high-field solid-state NMR. Chemical Communications, (17), 1575-1576. doi:10.1039/b003081nCorma, A., Fornés, V., & Rey, F. (1990). Extraction of extra-framework aluminium in ultrastable Y zeolites by (NH4)2SiF6 treatments. Applied Catalysis, 59(1), 267-274. doi:10.1016/s0166-9834(00)82203-4Corma, A., Fornés, V., Melo, F. V., & Herrero, J. (1987). Comparison of the information given by ammonia t.p.d. and pyridine adsorption—desorption on the acidity of dealuminated HY and LaHY zeolite cracking catalysts. Zeolites, 7(6), 559-563. doi:10.1016/0144-2449(87)90098-4Gore, K. U., Abraham, A., Hegde, S. G., Kumar, R., Amoureux, J.-P., & Ganapathy, S. (2002). 29Si and27Al MAS/3Q-MAS NMR Studies of High Silica USY Zeolites. The Journal of Physical Chemistry B, 106(23), 6115-6120. doi:10.1021/jp0143241PINE, L. (1990). Vanadium-catalyzed destruction of USY zeolites. Journal of Catalysis, 125(2), 514-524. doi:10.1016/0021-9517(90)90323-cHagiwara, K., Ebihara, T., Urasato, N., Ozawa, S., & Nakata, S. (2003). Effect of vanadium on USY zeolite destruction in the presence of sodium ions and steam—studies by solid-state NMR. Applied Catalysis A: General, 249(2), 213-228. doi:10.1016/s0926-860x(03)00289-8Sandoval-Díaz, L.-E., Palomeque-Forero, L.-A., & Trujillo, C. A. (2011). Towards understanding sodium effect on USY zeolite. Applied Catalysis A: General, 393(1-2), 171-177. doi:10.1016/j.apcata.2010.11.038Tangstad, E., Bendiksen, M., & Myrstad, T. (1997). Effect of sodium deposition of FCC catalysts deactivation. Applied Catalysis A: General, 150(1), 85-99. doi:10.1016/s0926-860x(96)00284-0Corma, A., Fornes, V., Monton, J. B., & Orchilles, A. V. (1986). Structural and cracking properties of REHY zeolites. Activity, selectivity, and catalyst-decay optimization for n-heptane cracking. Industrial & Engineering Chemistry Product Research and Development, 25(2), 231-238. doi:10.1021/i300022a018Corma, A. (2003). State of the art and future challenges of zeolites as catalysts. Journal of Catalysis, 216(1-2), 298-312. doi:10.1016/s0021-9517(02)00132-xOtterstedt, J.-E., Zhu, Y.-M., & Sterte, J. (1988). Catalytic cracking of heavy oil over catalysts containing different types of zeolite Y in active and inactive matrices. Applied Catalysis, 38(1), 143-155. doi:10.1016/s0166-9834(00)80993-8Al-Khattaf, S. (2003). The Influence of Alumina on the Performance of FCC Catalysts during Hydrotreated VGO Catalytic Cracking. Energy & Fuels, 17(1), 62-68. doi:10.1021/ef020066aFichtner-Schmittler, H., Lohse, U., Engelhardt, G., & Patzelová, V. (1984). Unit cell constants of zeolites stabilized by dealumination determination of Al content from lattice parameters. Crystal Research and Technology, 19(1), K1-K3. doi:10.1002/crat.217019012