Water absorption behaviour and its effect on the mechanical properties of flax fibre reinforced bioepoxy composites

In the context of sustainable development, considerable interest is being shown in the use of natural fibres like as reinforcement in polymer composites and in the development of resins from renewable resources. This paper focus on eco-friendly and sustainable green composites manufacturing using Resin Transfer Moulding (RTM) process. Flax fibre reinforced bioepoxy composites at different weight fractions (40 and 55wt%) were prepared in order to study the effect of water absorption on their mechanical properties. Water absorption test was carried out by immersion specimens in water bath at room temperature for a time duration. The process of water absorption of these composites was found to approach Fickian diffusion behavior. Diffusion coefficients and maximum water uptake values were evaluated, the results showed that both increased with an increase in fibre content. Tensile and flexural properties of water immersed specimens were evaluated and compared to dry composite specimens. The results suggest that swelling of flax fibres due to water absorption can have positive effects on mechanical properties of the composite material. The results of this study showed that RTM process could be used to manufacture natural fibre reinforced composites with good mechanical properties even for potential applications in a humid environmentThis research is supported by the Spanish Ministerio de Ciencia e Innovacion, Projects PAID-05-11, DPI 2010-20333, and DPI 2013-44903-R-AR.Muñoz Dominguez, E.; García Manrique, JA. (2015). Water absorption behaviour and its effect on the mechanical properties of flax fibre reinforced bioepoxy composites. International Journal of Polymer Science. 2015:1-10. https://doi.org/10.1155/2015/3902751102015Netravali, A. N., Huang, X., & Mizuta, K. (2007). Advanced «green» composites. Advanced Composite Materials, 16(4), 269-282. doi:10.1163/156855107782325230La Mantia, F. P., & Morreale, M. (2011). Green composites: A brief review. Composites Part A: Applied Science and Manufacturing, 42(6), 579-588. doi:10.1016/j.compositesa.2011.01.017Wambua, P., Ivens, J., & Verpoest, I. (2003). Natural fibres: can they replace glass in fibre reinforced plastics? Composites Science and Technology, 63(9), 1259-1264. doi:10.1016/s0266-3538(03)00096-4Summerscales, J., Dissanayake, N. P. J., Virk, A. S., & Hall, W. (2010). A review of bast fibres and their composites. Part 1 – Fibres as reinforcements. Composites Part A: Applied Science and Manufacturing, 41(10), 1329-1335. doi:10.1016/j.compositesa.2010.06.001Summerscales, J., Dissanayake, N., Virk, A., & Hall, W. (2010). A review of bast fibres and their composites. Part 2 – Composites. Composites Part A: Applied Science and Manufacturing, 41(10), 1336-1344. doi:10.1016/j.compositesa.2010.05.020Karus, M., & Kaup, M. (2002). Natural Fibres in the European Automotive Industry. Journal of Industrial Hemp, 7(1), 119-131. doi:10.1300/j237v07n01_10Puglia, D., Biagiotti, J., & Kenny, J. M. (2005). A Review on Natural Fibre-Based Composites—Part II. Journal of Natural Fibers, 1(3), 23-65. doi:10.1300/j395v01n03_03Uddin, N., & Kalyankar, R. R. (2011). Manufacturing and Structural Feasibility of Natural Fiber Reinforced Polymeric Structural Insulated Panels for Panelized Construction. International Journal of Polymer Science, 2011, 1-7. doi:10.1155/2011/963549Xie, Y., Hill, C. A. S., Xiao, Z., Militz, H., & Mai, C. (2010). Silane coupling agents used for natural fiber/polymer composites: A review. Composites Part A: Applied Science and Manufacturing, 41(7), 806-819. doi:10.1016/j.compositesa.2010.03.005Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2012). Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview. Composites Part B: Engineering, 43(7), 2883-2892. doi:10.1016/j.compositesb.2012.04.053DHAKAL, H., ZHANG, Z., & RICHARDSON, M. (2007). Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites. Composites Science and Technology, 67(7-8), 1674-1683. doi:10.1016/j.compscitech.2006.06.019Alamri, H., & Low, I. M. (2012). Mechanical properties and water absorption behaviour of recycled cellulose fibre reinforced epoxy composites. Polymer Testing, 31(5), 620-628. doi:10.1016/j.polymertesting.2012.04.002KARMAKER, A. C. (1997). Journal of Materials Science Letters, 16(6), 462-464. doi:10.1023/a:1018508209022Espert, A., Vilaplana, F., & Karlsson, S. (2004). Comparison of water absorption in natural cellulosic fibres from wood and one-year crops in polypropylene composites and its influence on their mechanical properties. Composites Part A: Applied Science and Manufacturing, 35(11), 1267-1276. doi:10.1016/j.compositesa.2004.04.004Ahmad, S. H., Rasid, R., Bonnia, N. N., Zainol, I., Mamun, A. A., Bledzki, A. K., & Beg, M. D. H. (2010). Polyester-Kenaf Composites: Effects of Alkali Fiber Treatment and Toughening of Matrix Using Liquid Natural Rubber. Journal of Composite Materials, 45(2), 203-217. doi:10.1177/0021998310373514Shen, C.-H., & Springer, G. S. (1976). Moisture Absorption and Desorption of Composite Materials. Journal of Composite Materials, 10(1), 2-20. doi:10.1177/002199837601000101Holbery, J., & Houston, D. (2006). Natural-fiber-reinforced polymer composites in automotive applications. JOM, 58(11), 80-86. doi:10.1007/s11837-006-0234-2Francucci, G., & Rodriguez, E. (2014). Processing of plant fiber composites by liquid molding techniques: An overview. Polymer Composites, 37(3), 718-733. doi:10.1002/pc.23229WANG, W., SAIN, M., & COOPER, P. (2006). Study of moisture absorption in natural fiber plastic composites. Composites Science and Technology, 66(3-4), 379-386. doi:10.1016/j.compscitech.2005.07.027Charlet, K., Jernot, J. P., Gomina, M., Bréard, J., Morvan, C., & Baley, C. (2009). Influence of an Agatha flax fibre location in a stem on its mechanical, chemical and morphological properties. Composites Science and Technology, 69(9), 1399-1403. doi:10.1016/j.compscitech.2008.09.002Bismarck, A., Aranberri-Askargorta, I., Springer, J., Lampke, T., Wielage, B., Stamboulis, A., … Limbach, H.-H. (2002). Surface characterization of flax, hemp and cellulose fibers; Surface properties and the water uptake behavior. Polymer Composites, 23(5), 872-894. doi:10.1002/pc.10485Karmaker, A. C., Hoffmann, A., & Hinrichsen, G. (1994). Influence of water uptake on the mechanical properties of jute fiber-reinforced polypropylene. Journal of Applied Polymer Science, 54(12), 1803-1807. doi:10.1002/app.1994.070541203Nevin, C. S., & Moser, B. F. (1963). Vinyl oil monomers. I. Vicinal methacryloxy-hydroxy soy oils. Journal of Applied Polymer Science, 7(5), 1853-1866. doi:10.1002/app.1963.070070523Miyagawa, H., Mohanty, A. K., Misra, M., & Drzal, L. T. (2004). Thermo-Physical and Impact Properties of Epoxy Containing Epoxidized Linseed Oil, 2. Macromolecular Materials and Engineering, 289(7), 636-641. doi:10.1002/mame.200400003Jin, F.-L., & Park, S.-J. (2008). Thermomechanical behavior of epoxy resins modified with epoxidized vegetable oils. Polymer International, 57(4), 577-583. doi:10.1002/pi.2280Zhu, J., Chandrashekhara, K., Flanigan, V., & Kapila, S. (2004). Curing and mechanical characterization of a soy-based epoxy resin system. Journal of Applied Polymer Science, 91(6), 3513-3518. doi:10.1002/app.13571Singh, B., Gupta, M., & Verma, A. (2000). The durability of jute fibre-reinforced phenolic composites. Composites Science and Technology, 60(4), 581-589. doi:10.1016/s0266-3538(99)00172-4Acha, B. A., Marcovich, N. E., & Reboredo, M. M. (2005). Physical and mechanical characterization of jute fabric composites. Journal of Applied Polymer Science, 98(2), 639-650. doi:10.1002/app.22083Biagiotti, J., Puglia, D., & Kenny, J. M. (2004). A Review on Natural Fibre-Based Composites-Part I. Journal of Natural Fibers, 1(2), 37-68. doi:10.1300/j395v01n02_04Joseph, P. ., Rabello, M. S., Mattoso, L. H. ., Joseph, K., & Thomas, S. (2002). Environmental effects on the degradation behaviour of sisal fibre reinforced polypropylene composites. Composites Science and Technology, 62(10-11), 1357-1372. doi:10.1016/s0266-3538(02)00080-5Stamboulis, A., Baillie, C. A., & Peijs, T. (2001). Effects of environmental conditions on mechanical and physical properties of flax fibers. Composites Part A: Applied Science and Manufacturing, 32(8), 1105-1115. doi:10.1016/s1359-835x(01)00032-