Modeling flow inside an anaerobic digester by CFD techniques

[EN] Anaerobic processes are used to treat high strength organic wastewater as well as for the treatment of primary and secondary sludge from conventional wastewater treatment plants. In these processes, heterotrophic microorganisms convert biodegradable organic matter to methane and carbon dioxide in the absence of dissolved oxygen and nitrate. Some of the most important aspects of the design of anaerobic digesters are related to hydraulic considerations. In spite of its important role in performance, hydraulics of flow inside digesters has not been quantified or adequately characterized. In this contribution a three-dimensional steady-state computational fluid dynamics (CFD) simulation has been performed for a particular anaerobic digester, in order to visualize the flow patterns. Flow and velocities profiles have been represented inside the digester to identify possible dead zones or stratifications. The geometry of a real digester installed in Valencia Waste Water Treatment Plant (located in Quart-Benager, Valencia, Spain) has been used in order to consider the proposed methodology.Authors want to acknowledge to Entidad Pública de Saneamiento de Aguas Residuales. This work has been partially supported by Instituto de la Mediana y Pequeña Industria Valenciana (IMPIVA, Project IMIDTF/20102/152) and Fondo Europeo de Desarrollo Regional (FEDER), and the Project “Aplicación de técnicas de la mecánica de Fluidos Computacional al Movimiento de Flujos Ambientales” Universitat Politècnica de València research incentives; which are gratefully acknowledgedMartínez Mendoza, A.; Montoya Martínez, T.; Fajardo Montañana, V.; López Jiménez, PA. (2011). Modeling flow inside an anaerobic digester by CFD techniques. International Journal of Energy and Environment. 2(6):963-974. http://hdl.handle.net/10251/438569639742