Fate of aluminium released by sacrificial anodes – Contamination of marine sediments by environmentally available compounds

International audienceTo protect their steel structures from corrosion by cathodic protection, many harbours use aluminium sacrificial anodes, which induces aluminium release and potential contamination of the surrounding waters and sediments. To study the impact on Al mobility, a natural marine sediment was artificially contaminated with aluminium from different sources: sulphate or chloride salts, or sacrificial anodes. To estimate Al mobility in sediments, single (HCl) and sequential (F6) extractions were performed; they highlighted that aluminium is poorly mobile in natural sediment (HCl-leachable: 2% and F6-leachable: 9%). Contamination by aluminium salts inhibits HCl-leachability (≤ 2%), whereas the Al F6-leachability is intensified up to 18%, suggesting that the additional aluminium is scavenged in a mobile fraction that HCl is not able to solubilise. In case of aluminium anode contamination, sediments present surging Al HCl-leachable (15%) and F6-leachable (32%) fractions, which are related to aluminium mineralogical speciation. Indeed, contrary to the Al naturally present or introduced by salts, Al released by anodes is partly bound to the acid-soluble fraction, probably because of the integration of the released Al into the calcareous deposit produced at the anodes surfaces that finally comes away and gets mixed up with the sediment. The presence of aluminium in the acid-soluble fraction of sediments could have an important environmental impact as this fraction is easily available. Indeed, Al scavenged in the acid-soluble fraction of sediments participates in enhancing Al lability near the sacrificial anodes and may affect the surrounding ecosystems