Fracture and microstructural study of bovine bone under mixed mode I/II loading

Understanding the fracture behavior and associated crack growth mechanism in bone material is an important issue for biomechanics and biomaterial researches. Fracture of bone often takes place due to complex loading conditions which result in combined tensile-shear (i.e. mixed mode) fracture mechanism. Several parameters such as loading type, applied loading direction relative to the bone axis, loading rate, age and etc., may affect the mixed mode fracture resistance and damage mechanism in such materials. In this research, a number of mixed mode I/II fracture experiments are conducted on bovine femur bone using a sub-sized test configuration called "compact beam bend (CBB)" specimen to investigate the fracture toughness of bone under different mode mixities. The specimen is rectangular beam containing a mid-edge crack that is loaded by a conventional three-point bend fixture. The results showed the dependency of bone fracture toughness on the state of mode mixity. The fracture surfaces of broken CBB specimens under different loading conditions were studied via scanning electron microscopy (SEM) observations. Fracture surface of all investigated cases (i.e. pure mode I, pure mode II and mixed mode I/II) exhibited smooth patterns demonstrating brittle fracture of bovine femur. The higher density of vascular channels and micro-cracks initiated in the weakened area surrounded by secondary osteons were found to be the main cause of the decreased bone resistance against crack growth and brittle fracture