This work deals with the relation between microstructure and electrochemical behavior of four iron-based FeCoC ternary alloys. First, the arc-melted studied alloys were characterized using differential thermal analyses and scanning electron microscopy. The established solidification sequences of these alloys show the presence of two primary crystallization phases (δ(Fe) and graphite) as well as two univariante lines : peritectic L+(Fe)↔(Fe) and eutectic L↔(Fe)+Cgraphite. The ternary alloys were thereafter studied in nondeaerated solution of 10−3 M NaHCO3 + 10−3 M Na2SO4, at 25°C, by means of the potentiodynamic technique. The results indicate that the corrosion resistance of the FeCoC alloys depends on the carbon amount and the morphology o...
In this paper, the effect of electrodepositing current density on the composition, microstructure an...
Nanocrystalline materials with grain sizes less than 100 nm, have attracted considerable attention d...
The influence of chemical composition and heat treatment on a low-carbon steel, chromium steel and h...
In the present paper, solidification sequences are proposed in relation to the observed microstructu...
katedra: KMT;Předmětem disertační práce je podrobné studium fázového složení vybraných aluminidů žel...
The correlation between corrosion behavior rate of annealed Fe-xC-5Cu alloys and their microstructur...
The electrodeposition of Fe, Co and Fe-Co alloys onto Pt has been investigated from chloride solutio...
Trabalho completo: acesso restrito, p. 106–111he main reason for the study of Fe-based (FINEMET and ...
A systematic study on the structural and magnetic properties of Fe100-xCox alloys (10<x<90, Δx=10 in...
The ternary Fe-Cu-Co system was studied within the complete range of compositions at temperature lim...
Four different multiphase Fe-xC alloys are prepared with different ferrite and cementite amounts. X-...
In this investigation, three different chemical compositions of Fe-Cr-C alloys were fabricated on AI...
In the present work, different Cu-alloyed model ductile irons with ferritic (0%Cu-0.09%Mn), mixed fe...
Electrochemical corrosion behaviour of iron aluminides, produced by electroslag remelting technique,...
The electrochemical behavior of the oxide layers on two metal-metal glassy alloys, Fe78Co9Cr10Mo2Al1...
In this paper, the effect of electrodepositing current density on the composition, microstructure an...
Nanocrystalline materials with grain sizes less than 100 nm, have attracted considerable attention d...
The influence of chemical composition and heat treatment on a low-carbon steel, chromium steel and h...
In the present paper, solidification sequences are proposed in relation to the observed microstructu...
katedra: KMT;Předmětem disertační práce je podrobné studium fázového složení vybraných aluminidů žel...
The correlation between corrosion behavior rate of annealed Fe-xC-5Cu alloys and their microstructur...
The electrodeposition of Fe, Co and Fe-Co alloys onto Pt has been investigated from chloride solutio...
Trabalho completo: acesso restrito, p. 106–111he main reason for the study of Fe-based (FINEMET and ...
A systematic study on the structural and magnetic properties of Fe100-xCox alloys (10<x<90, Δx=10 in...
The ternary Fe-Cu-Co system was studied within the complete range of compositions at temperature lim...
Four different multiphase Fe-xC alloys are prepared with different ferrite and cementite amounts. X-...
In this investigation, three different chemical compositions of Fe-Cr-C alloys were fabricated on AI...
In the present work, different Cu-alloyed model ductile irons with ferritic (0%Cu-0.09%Mn), mixed fe...
Electrochemical corrosion behaviour of iron aluminides, produced by electroslag remelting technique,...
The electrochemical behavior of the oxide layers on two metal-metal glassy alloys, Fe78Co9Cr10Mo2Al1...
In this paper, the effect of electrodepositing current density on the composition, microstructure an...
Nanocrystalline materials with grain sizes less than 100 nm, have attracted considerable attention d...
The influence of chemical composition and heat treatment on a low-carbon steel, chromium steel and h...