Comparison on the thermal degradation kinetics and mechanism of hides before and after formaldehyde-tanning

Content: The thermal degradation kinetics of hides before and after being tanned with formaldehyde were investigated using thermalgravimetric analysis (TGA) at four different heating rates of 5, 10, 20, 30 K/min. Such model-free methods as Flynn-Wall-Ozawa and Friedman as well as model-fitting method of Criado were employed to determine the thermal degradation active energy and degradation mechanism. Based on the Flynn-Wall-Ozawa and Friedman methods, the average active energy (Ea) of formaldehyde-tanned leather was 223.1 kJ/mol and 230.7 kJ/mol respectively. Results from general master curves showed diffusion processes in the thermal degradation of formaldehyde-tanned leather. Neither the thermal degradation activation energy nor the degradation mechanism is affected by the formaldehyde tanning. Nevertheless, the results by thermalgravimetric analyzer coupled with Fourier transform infrared spectrometry (TG-FTIR) indicated difference in the relative amounts of evolved products. According to the 3D-FTIR analysis, the dominant components of evolved gas for both untanned and tanned hides are CO2, CH4, H2O, NH3 along with small amount of HNCO. However, after formaldehyde tanning, both the evolved NH3 by the decomposition of free –NH2 groups and peptide –NH– groups from different amino acids in collagen and CH4 by the cleavage of -CH3 and -CH2- increase. Take-Away: 1. The theraml degradtion mechanism of hides before and after formaldehyde-tanning is eatablished in our paper. 2. The main degradation pathway of hides before and after formaldehyde-tanning is discussed with the help of TG-FTIR analysis