Zirconia was newly introduced to implant dentistry as an abutment to enhance esthetic result. However, careful handling, is recommended to avoid failures. Mechanical complications, such as loosening or damaging of the prosthetic components of an osseointegrated implant, may occur. Fracture of zirconiaabutment is not uncommon. This report describes a clinical situation involving a patient, who presented with a fractured Zirconia abutment. Upon further examination, it was determined that the abutment was fractured at the base. There was limited access and visibility in this situation since the implantwas a bone-level implant. The procedure used for the removal of the fractured zirconia abutment is ...
This multicenter retrospective clinical study aimed to evaluate the clinical performance of zirconia...
Purpose: This prospective clinical study evaluated an experimental custom-made zirconia abutment wit...
Objectives: An increasing aesthetic demand within developed populations conducted to the fabrication...
Technical complications in implant prosthetic cases represent a major challenge in dentistry. This c...
Zirconia abutments are used to obtain satisfactory aesthetic results in implant fixed anterior prost...
Objectives: This study was undertaken to characterize the mechanical response of bare (as-received) ...
Objectives: This study was undertaken to characterize the mechanical response of bare (as-received) ...
The increase of aesthetic demands, together with the successful outcome of current implants, has ren...
The purpose of the investigation was to analyze fracture resistance and mode of failure of zirconium...
The aim of this study is to evaluate through a literature review, the soft tissue response in contac...
PURPOSE To evaluate technical complications and failures of zirconia-based fixed prostheses suppo...
Purpose: An in vitro study was performed to assess the effect of different degrees of clinical reduc...
For over three decades, zirconia ceramics have been used in orthopaedic surgery, and they were just ...
The aim of this study was to compare titanium-reinforced ZrO2 and pure Al2O3 abutments regarding the...
Osama A Qutub, Ghadeer I Basunbul, Abdulelah M BinmahfoozDepartment of Oral and Maxillofacial Prosth...
This multicenter retrospective clinical study aimed to evaluate the clinical performance of zirconia...
Purpose: This prospective clinical study evaluated an experimental custom-made zirconia abutment wit...
Objectives: An increasing aesthetic demand within developed populations conducted to the fabrication...
Technical complications in implant prosthetic cases represent a major challenge in dentistry. This c...
Zirconia abutments are used to obtain satisfactory aesthetic results in implant fixed anterior prost...
Objectives: This study was undertaken to characterize the mechanical response of bare (as-received) ...
Objectives: This study was undertaken to characterize the mechanical response of bare (as-received) ...
The increase of aesthetic demands, together with the successful outcome of current implants, has ren...
The purpose of the investigation was to analyze fracture resistance and mode of failure of zirconium...
The aim of this study is to evaluate through a literature review, the soft tissue response in contac...
PURPOSE To evaluate technical complications and failures of zirconia-based fixed prostheses suppo...
Purpose: An in vitro study was performed to assess the effect of different degrees of clinical reduc...
For over three decades, zirconia ceramics have been used in orthopaedic surgery, and they were just ...
The aim of this study was to compare titanium-reinforced ZrO2 and pure Al2O3 abutments regarding the...
Osama A Qutub, Ghadeer I Basunbul, Abdulelah M BinmahfoozDepartment of Oral and Maxillofacial Prosth...
This multicenter retrospective clinical study aimed to evaluate the clinical performance of zirconia...
Purpose: This prospective clinical study evaluated an experimental custom-made zirconia abutment wit...
Objectives: An increasing aesthetic demand within developed populations conducted to the fabrication...