As-quenched Fe90Zr7B3 alloy has been crystallized at 773, 923 and 973 K, it is found that the specimens annealed at 773 and 923 K have grains with the same size, but the one annealed at 773 K has a thick amorphous matrix and a broad grain size distribution. Big domains and smooth domain walls are observed in the specimen annealed at the optimum condition (923 K), and excellent magnetic softness is obtained. On the other hand, the one annealed at 973 K has very large grains (40 nm). Very small domains with irregular walls are observed, indicating a weak intergranular exchange coupling.Through in situ Lorentz microscopy, a relaxation of internal stress in the specimen annealed at 773 K is observed at an elevated temperature (333 K). The inter...
Among various soft magnetic materials, ferromagnetic glasses are superior to their crystalline count...
The soft magnetic properties of Fe-based nanocrystalline alloys are determined by their grain size. ...
Fe-Si-B-Nb-Cu alloys are attractive for high frequency applications due to their low coercivity and ...
Nanocrystalline Fe-M-B (M=Zr or Nb) alloys prepared by crystallization of rapidly quenched amorphous...
The magnetic properties and the annealing process of Fe78Zr 7B15 amorphous ribbons are investigated ...
A detailed study on the nanocrystallization and its correlation with the attractive soft magnetic pr...
Amorphous ribbons of alloy composition Fe75B10Si15 are cast by melt spinning and annealed to partial...
In this paper, the nanocrystalline (Nd0.85Dy0.15)10Fe83Zr1B6 ribbons produced by melt-spinning have ...
Investigation of the $Fe_{60}Co_{13}Zr_1Ti_3Pr_9B_{14}$ alloy 1 mm diameter rods and 3 mm outer diam...
Fe84Zr3.5Nb3.5Cu1B8 melt-spun ribbons have been submitted to furnace annealing to relax quenched-in ...
Structure and magnetic properties of Nb-doped (FeZrB) 100-xNbx alloy are investigated by X-ray diffr...
Investigation of the Fe60Co13Zr1Ti3Pr9B14 alloy 1 mm diameter rods and 3 mm outer diameter tubes sho...
A detailed study on the nanocrystallization and its correlation with the attractive soft magnetic pr...
The soft magnetic properties of Fe-based nanocrystalline alloys are determined by their grain size. ...
The Fe–Cr alloy system is the basis of ferritic steels, which are important structural materials for...
Among various soft magnetic materials, ferromagnetic glasses are superior to their crystalline count...
The soft magnetic properties of Fe-based nanocrystalline alloys are determined by their grain size. ...
Fe-Si-B-Nb-Cu alloys are attractive for high frequency applications due to their low coercivity and ...
Nanocrystalline Fe-M-B (M=Zr or Nb) alloys prepared by crystallization of rapidly quenched amorphous...
The magnetic properties and the annealing process of Fe78Zr 7B15 amorphous ribbons are investigated ...
A detailed study on the nanocrystallization and its correlation with the attractive soft magnetic pr...
Amorphous ribbons of alloy composition Fe75B10Si15 are cast by melt spinning and annealed to partial...
In this paper, the nanocrystalline (Nd0.85Dy0.15)10Fe83Zr1B6 ribbons produced by melt-spinning have ...
Investigation of the $Fe_{60}Co_{13}Zr_1Ti_3Pr_9B_{14}$ alloy 1 mm diameter rods and 3 mm outer diam...
Fe84Zr3.5Nb3.5Cu1B8 melt-spun ribbons have been submitted to furnace annealing to relax quenched-in ...
Structure and magnetic properties of Nb-doped (FeZrB) 100-xNbx alloy are investigated by X-ray diffr...
Investigation of the Fe60Co13Zr1Ti3Pr9B14 alloy 1 mm diameter rods and 3 mm outer diameter tubes sho...
A detailed study on the nanocrystallization and its correlation with the attractive soft magnetic pr...
The soft magnetic properties of Fe-based nanocrystalline alloys are determined by their grain size. ...
The Fe–Cr alloy system is the basis of ferritic steels, which are important structural materials for...
Among various soft magnetic materials, ferromagnetic glasses are superior to their crystalline count...
The soft magnetic properties of Fe-based nanocrystalline alloys are determined by their grain size. ...
Fe-Si-B-Nb-Cu alloys are attractive for high frequency applications due to their low coercivity and ...