Add to ORKGVeneer densification was performed at 105±3 ºC under pressure of 1,8 N/mm2 for 30 s. The approach allowed to reduce 20-mm thick plywood pressing time by 12-25 % when compared to the non-densified controls. It was found that densifi cation did not affect shear strength of the plywood which met the requirements of the respective standards
In an effort to achieve high mechanical performance and improved dimensional stability, densificatio...
The hardness of the outer areas of solid wood can be improved by surface densification,and this open...
Ukrainian companies mainly use birch in the manufacture of plywood, but species, such as black alder...
Veneer densifi cation was performed at 105±3 ºC under pressure of 1,8 N/mm2 for 30 s. The approach a...
In Part I of this series, a novel method was proposed to assess surface roughness/quality and compre...
The assessment of the effect of thickness and thickness tolerances of beech veneers on the value of ...
The study investigated the effects of short-term thermo-mechanical (STTM) densification temperature ...
The impact of veneer punching pattern and density (343, 356, and 1424 hole·m-2) was tested relative ...
Wood veneer 700×700 mm2 specimens made with aspen (Populus tremuloides) and hybrid poplar clone 1530...
Tese (doutorado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Flore...
Density is one of the most significant factors affecting the mechanical properties of wood. Scots p...
The production of plywood from previously compressed veneer allows to save up to 25% of glue, to hal...
To understand the unique hot pressing behaviour of veneer-based composites, the key objectives of th...
Drying takes the largest share of energy in plywood production, and varying moisture content of vene...
Considered the principal device for sealing veneer with two drive rollers, each with a diameter of ...
In an effort to achieve high mechanical performance and improved dimensional stability, densificatio...
The hardness of the outer areas of solid wood can be improved by surface densification,and this open...
Ukrainian companies mainly use birch in the manufacture of plywood, but species, such as black alder...
Veneer densifi cation was performed at 105±3 ºC under pressure of 1,8 N/mm2 for 30 s. The approach a...
In Part I of this series, a novel method was proposed to assess surface roughness/quality and compre...
The assessment of the effect of thickness and thickness tolerances of beech veneers on the value of ...
The study investigated the effects of short-term thermo-mechanical (STTM) densification temperature ...
The impact of veneer punching pattern and density (343, 356, and 1424 hole·m-2) was tested relative ...
Wood veneer 700×700 mm2 specimens made with aspen (Populus tremuloides) and hybrid poplar clone 1530...
Tese (doutorado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Flore...
Density is one of the most significant factors affecting the mechanical properties of wood. Scots p...
The production of plywood from previously compressed veneer allows to save up to 25% of glue, to hal...
To understand the unique hot pressing behaviour of veneer-based composites, the key objectives of th...
Drying takes the largest share of energy in plywood production, and varying moisture content of vene...
Considered the principal device for sealing veneer with two drive rollers, each with a diameter of ...
In an effort to achieve high mechanical performance and improved dimensional stability, densificatio...
The hardness of the outer areas of solid wood can be improved by surface densification,and this open...
Ukrainian companies mainly use birch in the manufacture of plywood, but species, such as black alder...