Adsorption of Hg(II) from Aqueous Solution Using Adulsa (Justicia adhatoda) Leaves Powder: Kinetic and Equilibrium Studies

The ability of Adulsa leaves powder (ALP) to adsorb Hg(II) from aqueous solutions has been investigated through batch experiments. The ALP biomass was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The experimental parameters that were investigated in this study included pH, adsorbent dosage, and effect of contact time along with initial metal ion concentration. The adsorption process was relatively fast, and equilibrium was achieved after 40 min of contact time. The maximum removal of Hg(II), 97.5% was observed at pH 6. The adsorption data were correlated with Langmuir, Freundlich, and Temkin isotherms. Isotherms results were amply fitted by the Langmuir model determining a monolayer maximum adsorption capacity (qm) of ALP biomass equal to 107.5 mg g−1 and suggesting a functional group-limited sorption process. The kinetic process of Hg(II) adsorption onto ALP biomass was tested by applying pseudofirst-order, pseudosecond-order, Elovich, and intraparticle-diffusion models to correlate the experimental data and to determine the kinetic parameters. It was found that the pseudosecond order kinetic model for Hg(II) adsorption fitted very well. The rate determining step is described by intraparticle diffusion model. These studies considered the possibility of using Adulsa plant leaves biomass as an inexpensive, efficient, and environmentally safe adsorbent for the treatment of Hg(II) contaminated wastewaters