The CERN Proton Synchrotron machine is built using combined function magnets. The control of the linear tune as well as the chromaticity in both planes is achieved by means of special coils added to the main magnets, namely two pole-face-windings and one figure-of-eight loop. As a result, the overall magnetic field configuration is rather complex not to mention the saturation effects induced at top-energy. For these reasons a linear model of the PS main magnet does not provide sufficient precision to model particle dynamics. On the other hand, a sophisticated optical model is the key element for the foreseen intensity upgrade and, in particular, for the novel extraction mode based on adiabatic capture of beam particles inside stable islands...
The CERN Proton Synchrotron (PS) has a circumference of 628m and operates at an energy of up to 26 G...
In the framework of the CERN PSMulti-Turn Extraction several campaigns of measurements probing the n...
The commissioning, development and results of an Electro-Optic Beam Position Moni- tor (EO-BPM) prot...
The CERN Proton Synchrotron machine is built using combined function magnets. The control of the lin...
The working point of the CERN Proton Synchrotron, which is equipped with combined function magnets, ...
The performance of the CERN Proton Synchrotron (PS) has been constantly increasing over the years bo...
For the first time, the optics of the CERN Proton Synchrotron (PS) was measured using turn-by-turn B...
The CERN Proton Synchrotron (PS) will remain one of the key elements of the Large Hadron Collider (L...
This thesis concerns the reconstruction of a new set of extraction parameters from the Proton Synchr...
Recently, a novel approach to perform multi-turn extraction from a circular accelerator was proposed...
The knowledge of the magnetic field generated by the main magnets of the CERN Proton Synchrotron (PS...
Future operations for the CERN accelerator complex will require the PS Booster to deliver higher int...
The CERN Super Proton Synchrotron (SPS) provides different types of beams at different extraction en...
The working point of the CERN Proton Synchrotron, which is equipped with combined function magnets, ...
Nonlinear fields arising from eddy currents in the vac-uum chamber and remanent fields in the magnet...
The CERN Proton Synchrotron (PS) has a circumference of 628m and operates at an energy of up to 26 G...
In the framework of the CERN PSMulti-Turn Extraction several campaigns of measurements probing the n...
The commissioning, development and results of an Electro-Optic Beam Position Moni- tor (EO-BPM) prot...
The CERN Proton Synchrotron machine is built using combined function magnets. The control of the lin...
The working point of the CERN Proton Synchrotron, which is equipped with combined function magnets, ...
The performance of the CERN Proton Synchrotron (PS) has been constantly increasing over the years bo...
For the first time, the optics of the CERN Proton Synchrotron (PS) was measured using turn-by-turn B...
The CERN Proton Synchrotron (PS) will remain one of the key elements of the Large Hadron Collider (L...
This thesis concerns the reconstruction of a new set of extraction parameters from the Proton Synchr...
Recently, a novel approach to perform multi-turn extraction from a circular accelerator was proposed...
The knowledge of the magnetic field generated by the main magnets of the CERN Proton Synchrotron (PS...
Future operations for the CERN accelerator complex will require the PS Booster to deliver higher int...
The CERN Super Proton Synchrotron (SPS) provides different types of beams at different extraction en...
The working point of the CERN Proton Synchrotron, which is equipped with combined function magnets, ...
Nonlinear fields arising from eddy currents in the vac-uum chamber and remanent fields in the magnet...
The CERN Proton Synchrotron (PS) has a circumference of 628m and operates at an energy of up to 26 G...
In the framework of the CERN PSMulti-Turn Extraction several campaigns of measurements probing the n...
The commissioning, development and results of an Electro-Optic Beam Position Moni- tor (EO-BPM) prot...