We give the present status of the field quality in the main LHC dipoles. Special emphasis is given to the collared coil data: a few tens of coils have been built, allowing a first analysis of the variability between producers, and estimates of the random part. Effects of the corrective actions implemented to fine tune the systematics components of low-order multipoles are presented. Correlations of collared coil data to the magnetic field measurements in operational conditions are discussed. Comparison to specifications imposed by beam dynamics allows to pin out the most critical requirements that will have to be met during the LHC dipole production
We have measured the magnetic field at room temperature and at 1.8 K on more than twenty, 1-m long, ...
The LHC will be composed of 1232 horizontally curved, 15-meter long, superconducting dipole assembli...
The series testing at 1.9 K of the 360 Short Straight Sections (SSS) for the Large Hadron Collider h...
We give the present status of the field quality in the main LHC dipoles. Special emphasis is given t...
We review the warm magnetic measurements of the first four main dipole prototypes (8 apertures) and ...
Magnetic field measurements are an important tool to monitor the LHC main dipole production. In this...
We report the main results of the magnetic field measurements performed on the full-size LHC superco...
The field quality measurements at room temperature of around 100 collared coils of the main LHC dipo...
At present about 90% of the main dipoles for the LHC have been manufactured and one of the three col...
The main issues concerning the field quality in the main quadrupoles of the Large Hadron Collider ar...
In this work a detailed analysis of the influence of the mechanical components and the assembly proc...
N° d'ordre : DU 1722, EDSF : 521The 1234 superconducting dipoles of the Large Hadron Collider, worki...
Magnetic field measurements are an important tool to monitor the LHC main dipole production. In this...
The field strength and homogeneity of all the LHC superconducting magnets were measured as a part of...
A full characterization of the magnetic field in warm and cold conditions was performed as a part of...
We have measured the magnetic field at room temperature and at 1.8 K on more than twenty, 1-m long, ...
The LHC will be composed of 1232 horizontally curved, 15-meter long, superconducting dipole assembli...
The series testing at 1.9 K of the 360 Short Straight Sections (SSS) for the Large Hadron Collider h...
We give the present status of the field quality in the main LHC dipoles. Special emphasis is given t...
We review the warm magnetic measurements of the first four main dipole prototypes (8 apertures) and ...
Magnetic field measurements are an important tool to monitor the LHC main dipole production. In this...
We report the main results of the magnetic field measurements performed on the full-size LHC superco...
The field quality measurements at room temperature of around 100 collared coils of the main LHC dipo...
At present about 90% of the main dipoles for the LHC have been manufactured and one of the three col...
The main issues concerning the field quality in the main quadrupoles of the Large Hadron Collider ar...
In this work a detailed analysis of the influence of the mechanical components and the assembly proc...
N° d'ordre : DU 1722, EDSF : 521The 1234 superconducting dipoles of the Large Hadron Collider, worki...
Magnetic field measurements are an important tool to monitor the LHC main dipole production. In this...
The field strength and homogeneity of all the LHC superconducting magnets were measured as a part of...
A full characterization of the magnetic field in warm and cold conditions was performed as a part of...
We have measured the magnetic field at room temperature and at 1.8 K on more than twenty, 1-m long, ...
The LHC will be composed of 1232 horizontally curved, 15-meter long, superconducting dipole assembli...
The series testing at 1.9 K of the 360 Short Straight Sections (SSS) for the Large Hadron Collider h...