Mini-interfacial Fracture Toughness of a Multimode Adhesive Bonded to Plasma-treated Dentin

Micro-shear bond strength of five resin-based composites to dentin with five different dentin adhesives

노병덕

May 2017

PURPOSE: To test whether the combination of dentin adhesive and resin-based composite from the same ...

Academy of Dental Materials guidance on in vitro testing of dental composite bonding effectiveness to dentin/enamel using micro-tensile bond strength (μTBS) approach

Armstrong, Steve
Breschi, Lorenzo
Özcan, Mutlu
Pfefferkorn, Frank
Ferrari, Marco
Van Meerbeek, Bart

February 2017

An ideal dental adhesive should provide retentive strength, marginal seal, be relatively simple to a...

A comparison of microtensile bond strengths of several dentin bonding systems to primary and permanent dentin

Nopnakeepong, U
Burrow, MF
Phrukkanon, S

January 2002

Objectives: Limited information exists with regard to the adhesive ability of glass ionomer cements ...

Mini-interfacial Fracture Toughness of a Multimode Adhesive Bonded to Plasma-treated Dentin

Ayres, Ana Paula Almeida
Pongprueksa, Pong
De Munck, Jan
Gré, Cristina Parise
Nascimento, Fábio Dupart
Giannini, Marcelo
Van Meerbeek, Bart

January 2017

To investigate the bonding efficacy of a multimode adhesive to plasma-treated and -untreated (contro...

Dentin bonding testing using a mini-interfacial fracture toughness approach

Pongprueska, Pong
De Munck, Jan
Karunratanakul, K
Barreto, BC
Van Ende, Annelies
Senawongse, P
Van Meerbeek, Bart

November 2015

Measurement of interfacial fracture toughness (iFT) is considered a more valid method to assess bond...

Polymerization Efficacy Affects the Long-term Mini-interfacial Fracture Toughness

Pongprueksa, Pong
De Munck, Jan
Barreto, Bruno C
Van Meerbeek, Bart

January 2017

PURPOSE: To evaluate the effect of the type and concentration of photo-initiator on the long-term bo...

Correlative analysis of cement-dentin interfaces using an interfacial fracture toughness and micro-tensile bond strength approach

Souza, Evelise M
De Munck, Jan
Pongprueksa, Pong
Van Ende, Annelies
Van Meerbeek, Bart

December 2016

To determine the interfacial fracture toughness (iFT) and micro-tensile strength (μTBS) of composite...

Fracture toughness versus micro-tensile bond strength testing of adhesive-dentin interfaces

De Munck, Jan
Luehrs, Anne-Katrin
Poitevin, André
Van Ende, Annelies
Van Meerbeek, Bart

June 2013

The objective of the study was to assess interfacial fracture toughness of different adhesive approa...

Interfacial fracture toughness of aged adhesive-dentin interfaces

De Munck, Jan
Poitevin, André
Lührs, Anne-Katrin
Pongprueksa, Pong
Van Ende, Annelies
Van Landuyt, Kirsten
Van Meerbeek, Bart

April 2015

To assess interfacial fracture toughness of different adhesive approaches and compare to a standard ...

Micro-tensile bond strength and interfacial characterization of an adhesive bonded to dentin prepared by contemporary caries-excavation techniques

Neves, Aline de A
Coutinho, Eduardo
Cardoso, Marcio V
De Munck, Jan
Van Meerbeek, Bart

June 2011

To evaluate the micro-tensile bond strength (μTBS) and interfacial characteristics of adhesive-denti...

Influence of three specimen fixation modes on the micro-tensile bond strength of adhesives to dentin

Poitevin, André
De Munck, Jan
Van Landuyt, Kirsten
Coutiño, Eduardo
Peumans, Marleen
Lambrechts, Paul
Van Meerbeek, Bart

September 2007

The aim of this study was to investigate in how far the way the specimen is fixed to the testing dev...

Characterization of an Experimental Two-Step Self-Etch Adhesive’s Bonding Performance and Resin-Dentin Interfacial Properties

Chowdhury, Abu Faem Mohammad Almas
Alam, Arefin
Yamauti, Monica
Álvarez Lloret, Pedro
Saikaew, Pipop
Carvalho, Ricardo Marins
Sano, Hidehiko

March 2021

This study evaluated an experimental two-step self-etch adhesive (BZF-29, BZF) by comparing it with ...

Characterization of an Experimental Two-Step Self-Etch Adhesive's Bonding Performance and Resin-Dentin Interfacial Properties

Chowdhury, Abu Faem Mohammad Almas
Alam, Arefin
Yamauti, Monica
Alvarez Lloret, Pedro
Saikaew, Pipop
Carvalho, Ricardo Marins
Sano, Hidehiko

March 2021

This study evaluated an experimental two-step self-etch adhesive (BZF-29, BZF) by comparing it with ...

Bonding of contemporary glass ionomer cements to dentin

Yip, HK
Tay, FR
Ngo, HC
Smales, RJ
Pashley, DH

January 2001

Objective: The objective of this study was to investigate the microtensile bond strength (μTBS) of c...

Critical analysis of the influence of different parameters on the microtensile bond strength of adhesives to dentin

Poitevin, André
De Munck, Jan
Van Landuyt, Kirsten
Coutiño, Eduardo
Peumans, Marleen
Lambrechts, Paul
Van Meerbeek, Bart

February 2008

PURPOSE: To evaluate how six different test parameters (TP) of the microtensile bond strength (micro...

Micro-shear bond strength of five resin-based composites to dentin with five different dentin adhesives

노병덕

May 2017

PURPOSE: To test whether the combination of dentin adhesive and resin-based composite from the same ...

Academy of Dental Materials guidance on in vitro testing of dental composite bonding effectiveness to dentin/enamel using micro-tensile bond strength (μTBS) approach

Armstrong, Steve
Breschi, Lorenzo
Özcan, Mutlu
Pfefferkorn, Frank
Ferrari, Marco
Van Meerbeek, Bart

February 2017

An ideal dental adhesive should provide retentive strength, marginal seal, be relatively simple to a...

A comparison of microtensile bond strengths of several dentin bonding systems to primary and permanent dentin

Nopnakeepong, U
Burrow, MF
Phrukkanon, S

January 2002

Objectives: Limited information exists with regard to the adhesive ability of glass ionomer cements ...

Mini-interfacial Fracture Toughness of a Multimode Adhesive Bonded to Plasma-treated Dentin

Ayres, Ana Paula Almeida
Pongprueksa, Pong
De Munck, Jan
Gré, Cristina Parise
Nascimento, Fábio Dupart
Giannini, Marcelo
Van Meerbeek, Bart

January 2017

To investigate the bonding efficacy of a multimode adhesive to plasma-treated and -untreated (contro...

Dentin bonding testing using a mini-interfacial fracture toughness approach

Pongprueska, Pong
De Munck, Jan
Karunratanakul, K
Barreto, BC
Van Ende, Annelies
Senawongse, P
Van Meerbeek, Bart

November 2015

Measurement of interfacial fracture toughness (iFT) is considered a more valid method to assess bond...

Polymerization Efficacy Affects the Long-term Mini-interfacial Fracture Toughness

Pongprueksa, Pong
De Munck, Jan
Barreto, Bruno C
Van Meerbeek, Bart

January 2017

PURPOSE: To evaluate the effect of the type and concentration of photo-initiator on the long-term bo...

Correlative analysis of cement-dentin interfaces using an interfacial fracture toughness and micro-tensile bond strength approach

Souza, Evelise M
De Munck, Jan
Pongprueksa, Pong
Van Ende, Annelies
Van Meerbeek, Bart

December 2016

To determine the interfacial fracture toughness (iFT) and micro-tensile strength (μTBS) of composite...

Fracture toughness versus micro-tensile bond strength testing of adhesive-dentin interfaces

De Munck, Jan
Luehrs, Anne-Katrin
Poitevin, André
Van Ende, Annelies
Van Meerbeek, Bart

June 2013

The objective of the study was to assess interfacial fracture toughness of different adhesive approa...

Interfacial fracture toughness of aged adhesive-dentin interfaces

De Munck, Jan
Poitevin, André
Lührs, Anne-Katrin
Pongprueksa, Pong
Van Ende, Annelies
Van Landuyt, Kirsten
Van Meerbeek, Bart

April 2015

To assess interfacial fracture toughness of different adhesive approaches and compare to a standard ...

Micro-tensile bond strength and interfacial characterization of an adhesive bonded to dentin prepared by contemporary caries-excavation techniques

Neves, Aline de A
Coutinho, Eduardo
Cardoso, Marcio V
De Munck, Jan
Van Meerbeek, Bart

June 2011

To evaluate the micro-tensile bond strength (μTBS) and interfacial characteristics of adhesive-denti...

Influence of three specimen fixation modes on the micro-tensile bond strength of adhesives to dentin

Poitevin, André
De Munck, Jan
Van Landuyt, Kirsten
Coutiño, Eduardo
Peumans, Marleen
Lambrechts, Paul
Van Meerbeek, Bart

September 2007

The aim of this study was to investigate in how far the way the specimen is fixed to the testing dev...

Characterization of an Experimental Two-Step Self-Etch Adhesive’s Bonding Performance and Resin-Dentin Interfacial Properties

Chowdhury, Abu Faem Mohammad Almas
Alam, Arefin
Yamauti, Monica
Álvarez Lloret, Pedro
Saikaew, Pipop
Carvalho, Ricardo Marins
Sano, Hidehiko

March 2021

This study evaluated an experimental two-step self-etch adhesive (BZF-29, BZF) by comparing it with ...

Characterization of an Experimental Two-Step Self-Etch Adhesive's Bonding Performance and Resin-Dentin Interfacial Properties

Chowdhury, Abu Faem Mohammad Almas
Alam, Arefin
Yamauti, Monica
Alvarez Lloret, Pedro
Saikaew, Pipop
Carvalho, Ricardo Marins
Sano, Hidehiko

March 2021

This study evaluated an experimental two-step self-etch adhesive (BZF-29, BZF) by comparing it with ...

Bonding of contemporary glass ionomer cements to dentin

Yip, HK
Tay, FR
Ngo, HC
Smales, RJ
Pashley, DH

January 2001

Objective: The objective of this study was to investigate the microtensile bond strength (μTBS) of c...

Critical analysis of the influence of different parameters on the microtensile bond strength of adhesives to dentin

Poitevin, André
De Munck, Jan
Van Landuyt, Kirsten
Coutiño, Eduardo
Peumans, Marleen
Lambrechts, Paul
Van Meerbeek, Bart

February 2008

PURPOSE: To evaluate how six different test parameters (TP) of the microtensile bond strength (micro...

Micro-shear bond strength of five resin-based composites to dentin with five different dentin adhesives

노병덕

May 2017

PURPOSE: To test whether the combination of dentin adhesive and resin-based composite from the same ...

Academy of Dental Materials guidance on in vitro testing of dental composite bonding effectiveness to dentin/enamel using micro-tensile bond strength (μTBS) approach

Armstrong, Steve
Breschi, Lorenzo
Özcan, Mutlu
Pfefferkorn, Frank
Ferrari, Marco
Van Meerbeek, Bart

February 2017

An ideal dental adhesive should provide retentive strength, marginal seal, be relatively simple to a...

A comparison of microtensile bond strengths of several dentin bonding systems to primary and permanent dentin

Nopnakeepong, U
Burrow, MF
Phrukkanon, S

January 2002

Objectives: Limited information exists with regard to the adhesive ability of glass ionomer cements ...

Mini-interfacial Fracture Toughness of a Multimode Adhesive Bonded to Plasma-treated Dentin

Abstract

Extracted data

Mini-interfacial Fracture Toughness of a Multimode Adhesive Bonded to Plasma-treated Dentin

Abstract

Extracted data

Related items

Related items