Translation from murine to human lung imaging using x-ray dark field radiography: A simulation study

Recent studies on murine models have demonstrated the potential of dark field (DF) x-ray imaging for lung diseases. The alveolar microstructure causes small angle scattering, which is visualised in DF images. Whether DF imaging works for human lungs is not a priori guaranteed as human alveoli are larger and system settings for murine imaging will probably have to be adapted. This work examines the potential of translating DF imaging to human lungs. The DF contrast due to murine and human lung models was studied using numerical wave propagation simulations, where the lungs were modelled as a volume filled with spheres. Three sphere diameters were used: 39, 60 and 80 μm for the murine model and 200, 300 and 400 μm spheres for the human model. System settings applied for murine lung response modelling were taken from a prototype grating interferometry scanner used in murine lung experiments. The settings simulated for human lung imaging simulations combine the requirements for grating interferometry and conventional chest RX in terms of x-ray energy and pixel size. The DF signal in the simulated murine model was consistent with results from experimental DF data. The simulated linear diffusion coefficient for medium alveoli diameters was found to be (1.31±0.01)⋅10-11 mm-1, 120 times larger than those of human lung tissue ((1.09±0.01)⋅10-13 mm-1). However, as the human thorax is typically a factor 15 times larger than that of murine animals, the overall DF effect in human lungs remains substantial. At the largest lung thickness and for the DF setup simulated, human lungs have an estimated DF response of around 0.31 and murine lungs of 0.23. Dark field imaging can therefore be considered a promising modality for use in human lung imaging.status: publishe