Extracting drainage networks and their connectivity using LiDAR data

Policies, measures, and models geared towards flood prevention and managing surface waters benefit from high quality data on the presence and characteristics of drainage ditches. As a cost and labour effective alternative for acquiring such data through field surveys, we propose a method (a) to extract vector data representing ditch drainage networks based on local morphologic features derived from high resolution digital elevation models (DEM) and (b) to identify possible connections in the ditch network by calculating a probability of the connectivity using a logistic regression where the predictor variables are characteristics of the ditch centre lines or derived from the DEM. Using Light Detection and Ranging (LiDAR) derived DEMs with a 1 m resolution, the method was developed and tested for a mixed agricultural residential area in north‐eastern Belgium. The derived ditch segments had an error of omission of 8% and an error of commission of 5%. The original positional accuracy of the centre lines of the extracted ditches was 0.6 m and could be improved to 0.4 m by shifting each vertex to the position of the lowest LiDAR point located within a radius equal to the spatial resolution of the used DEM. About 69% of the false disconnections in the network were identified and corrected leading to a reduction of the unconnected parts of the ditch network by 71%. The extracted and connected network approximated the reference ditch network fairly well.status: publishe