A cold-drawn Ti-50.8 at.% Ni wire was annealed at 700 °C for different times, leading to increasing grain size as a function of the annealing time. Theses samples were further aged at 250 °C for 24 h. After aging treatment, samples with different grain sizes showed different transformation behavior. This study explains the influence of grain size on the aging microstructure of the aged Ti-50.8 at.% Ni alloy and the subsequent transformation behavior.status: publishe
In this article, the effect of aging on martensitic transformation of Ti48.8Ni50.8V0.4 alloy was inv...
The paper was investigated the effect of preliminary multiple martensitic transformations on the mic...
Ti-6Al-4V (Ti64 or TC4) alloy is widely used in the industrial field. However, there have been few s...
A cold-drawn Ti-50.8 at.% Ni wire was annealed at 700 °C for different times, leading to increasing ...
A Ti-50.8 at.% Ni alloy with small grains (average grain size of 1.8 μm) was subjected to various ag...
A Ti-50.8 at.% Ni alloy with small grains (average grain size of 1.8 μm) was subjected to various ag...
Transformation characteristics, microstructures and tensile properties of a Ti-49.7at.%Ni-1.38at.%Co...
Transformation characteristics, microstructures and tensile properties of a Ti-49.7at.%Ni-1.38at.%Co...
This study investigated the effect of ageing on the transformation behaviour of a Ti-50.9 at.% Ni al...
A Ti-50.8at.%Ni wire produced using a co-drawing method and a commercial Ti-50.8at.%Ni wire were ann...
In this study, a commercial Ti-50.7at.%Ni was subjected to solution treatment at 800°C and 900°C for...
The paper was investigated the effect of preliminary multiple martensitic transformations on the mic...
In this article, the effect of aging on martensitic transformation of Ti48.8Ni50.8V0.4 alloy was inv...
The main properties of Ni-Ti alloys, i.e., shape memory and superelasticity, are used in engineering...
The spontaneous shape changes of Ti-51.5 at% Ni all-round shape memory alloy were measured after the...
In this article, the effect of aging on martensitic transformation of Ti48.8Ni50.8V0.4 alloy was inv...
The paper was investigated the effect of preliminary multiple martensitic transformations on the mic...
Ti-6Al-4V (Ti64 or TC4) alloy is widely used in the industrial field. However, there have been few s...
A cold-drawn Ti-50.8 at.% Ni wire was annealed at 700 °C for different times, leading to increasing ...
A Ti-50.8 at.% Ni alloy with small grains (average grain size of 1.8 μm) was subjected to various ag...
A Ti-50.8 at.% Ni alloy with small grains (average grain size of 1.8 μm) was subjected to various ag...
Transformation characteristics, microstructures and tensile properties of a Ti-49.7at.%Ni-1.38at.%Co...
Transformation characteristics, microstructures and tensile properties of a Ti-49.7at.%Ni-1.38at.%Co...
This study investigated the effect of ageing on the transformation behaviour of a Ti-50.9 at.% Ni al...
A Ti-50.8at.%Ni wire produced using a co-drawing method and a commercial Ti-50.8at.%Ni wire were ann...
In this study, a commercial Ti-50.7at.%Ni was subjected to solution treatment at 800°C and 900°C for...
The paper was investigated the effect of preliminary multiple martensitic transformations on the mic...
In this article, the effect of aging on martensitic transformation of Ti48.8Ni50.8V0.4 alloy was inv...
The main properties of Ni-Ti alloys, i.e., shape memory and superelasticity, are used in engineering...
The spontaneous shape changes of Ti-51.5 at% Ni all-round shape memory alloy were measured after the...
In this article, the effect of aging on martensitic transformation of Ti48.8Ni50.8V0.4 alloy was inv...
The paper was investigated the effect of preliminary multiple martensitic transformations on the mic...
Ti-6Al-4V (Ti64 or TC4) alloy is widely used in the industrial field. However, there have been few s...