Nanostructured WC–12Co coating with crystal sizes below 30 nm were deposited on low carbon steel substrate by high velocity oxy-fuel spraying. In this study, corrosion behavior of such coatings was investigated in artificial sea water electrolyte and compared with micron-sized (internal structure) coating of similar composition. Besides that, role of small amount Al alloying on corrosion behavior of such nanostructured coating was also investigated. Nanostructured WC–12Co coatings with or without Al exhibit lower corrosion potential and lower polarization resistance compared to micron-sized (internal structure) coating as well as higher Co dissolution as revealed by electrochemical impedance spectroscopy (EIS) together with other complement...
To promote the application of magnesium alloys for reducing the weight of the engineering components...
Several kinds of WC-reinforced coatings were prepared by high-velocity oxygen-fuel spray (HVOF) and ...
Nanocrystalline materials with grain sizes less than 100 nm, have attracted considerable attention d...
International audienceNanostructured WC–12Co coating with crystal sizes below 30 nm were deposited o...
The corrosion and corrosion-wear behaviour of a thermal sprayed nanostructured FeCu/WC-Co coating we...
Conventional (micron size) and Nanostructured (multimodal) WC-Co powders were sprayed on Al alloys u...
Nanostructured WC-Co and WC-Co-Al coatings, with about 300-µm as-deposited coating thickness, were d...
The electrochemical corrosion resistance of nanostructured hardmetals with grain sizes dWC 3C2, and ...
Different machine parts in oil and gas industries suffer from erosion-corrosion degradations due to ...
Nanostructured WC-Co based coatings were investigated. The main focus was given to the effect of Al ...
Nanostructured and composite WC-12Co coatings were prepared by means of the supersonic spray process...
In this paper, the electrochemical corrosion resistance of near-nano and nanostructured WC-Co cement...
The primary objective of the present work was to investigate the influence of microstructure on the ...
Tungsten carbide-based hard metal coatings are extensively used in demanding industrial applications...
Flow-accelerated corrosion (FAC) of carbon steel pipe systems in secondary system of nuclear power p...
To promote the application of magnesium alloys for reducing the weight of the engineering components...
Several kinds of WC-reinforced coatings were prepared by high-velocity oxygen-fuel spray (HVOF) and ...
Nanocrystalline materials with grain sizes less than 100 nm, have attracted considerable attention d...
International audienceNanostructured WC–12Co coating with crystal sizes below 30 nm were deposited o...
The corrosion and corrosion-wear behaviour of a thermal sprayed nanostructured FeCu/WC-Co coating we...
Conventional (micron size) and Nanostructured (multimodal) WC-Co powders were sprayed on Al alloys u...
Nanostructured WC-Co and WC-Co-Al coatings, with about 300-µm as-deposited coating thickness, were d...
The electrochemical corrosion resistance of nanostructured hardmetals with grain sizes dWC 3C2, and ...
Different machine parts in oil and gas industries suffer from erosion-corrosion degradations due to ...
Nanostructured WC-Co based coatings were investigated. The main focus was given to the effect of Al ...
Nanostructured and composite WC-12Co coatings were prepared by means of the supersonic spray process...
In this paper, the electrochemical corrosion resistance of near-nano and nanostructured WC-Co cement...
The primary objective of the present work was to investigate the influence of microstructure on the ...
Tungsten carbide-based hard metal coatings are extensively used in demanding industrial applications...
Flow-accelerated corrosion (FAC) of carbon steel pipe systems in secondary system of nuclear power p...
To promote the application of magnesium alloys for reducing the weight of the engineering components...
Several kinds of WC-reinforced coatings were prepared by high-velocity oxygen-fuel spray (HVOF) and ...
Nanocrystalline materials with grain sizes less than 100 nm, have attracted considerable attention d...