The precipitation of the (Mn,Fe)Al-6 phase during preheating of a commercial AA 5182 Al-Mg alloy was studied by means of scanning electron microscopy, transmission electron microscopy and selected area electron diffraction. The existence of two different morphologies with low and high aspect ratio (called here rhomboidal and platelike) was confirmed. The influence of preheating parameters on the precipitation was found to be close to the one known for Al-Mn alloys. It was found that the platelike dispersoids bear orientation relationships with the matrix of type [100](m) parallel to[(2) over bar 10](pp) and (0(1) over bar1$)(m) parallel to(001)(pp), which are not yet reported in the literature. On the other hand it was shown that rhomboidal...
The shapes and orientations of precipitates have important influences on the mechanical properties o...
In aluminium alloys, iron is a common impurity as it is unavoidably picked up in practice. The exces...
International audienceThis paper focus on the hardening precipitation in a 2650 Al(CuMg) aluminium a...
The phase transformation in the plate-like precipitates of Al6Mn in an AA3004 Al-Mn based alloy, whi...
This work has investigated the effect of the combination of natural ageing and 80% pre-deformation a...
International audienceThe hardening precipitation of an Al-Cu-Mg aluminium alloy designed for aerona...
This study shows that Fe and Mn bearing phases in Al–Si alloys containing a low level of Fe and Mn a...
The development of continuous precipitate morphology in heat-treated Mg-9 wt%Al-1 wt%Zn alloy (AZ91)...
The occurrence of grain boundary precipitates was investigated with respect to the crystallographic ...
\u3cp\u3eSingle crystals of manganese aluminates having compositions round about MnAl\u3csub\u3e2\u3...
The recrystallization behaviour of Al-Mn alloys (AA3xxx series alloys) is affected by randomly distr...
Discontinuous precipitates (DPs) have a random distribution at grain boundaries in commercial AZ91 M...
The influence of cooling rate during solidification on the three dimensional (3D) morphology of iron...
The aluminium based engineering alloy AW 6016 of nominal composition 98.44 Al 0.45 Mg 0.96 Si 0.11 F...
<div><p>A new methodology to study the precipitation crystallography of dispersoids in an Al matrix ...
The shapes and orientations of precipitates have important influences on the mechanical properties o...
In aluminium alloys, iron is a common impurity as it is unavoidably picked up in practice. The exces...
International audienceThis paper focus on the hardening precipitation in a 2650 Al(CuMg) aluminium a...
The phase transformation in the plate-like precipitates of Al6Mn in an AA3004 Al-Mn based alloy, whi...
This work has investigated the effect of the combination of natural ageing and 80% pre-deformation a...
International audienceThe hardening precipitation of an Al-Cu-Mg aluminium alloy designed for aerona...
This study shows that Fe and Mn bearing phases in Al–Si alloys containing a low level of Fe and Mn a...
The development of continuous precipitate morphology in heat-treated Mg-9 wt%Al-1 wt%Zn alloy (AZ91)...
The occurrence of grain boundary precipitates was investigated with respect to the crystallographic ...
\u3cp\u3eSingle crystals of manganese aluminates having compositions round about MnAl\u3csub\u3e2\u3...
The recrystallization behaviour of Al-Mn alloys (AA3xxx series alloys) is affected by randomly distr...
Discontinuous precipitates (DPs) have a random distribution at grain boundaries in commercial AZ91 M...
The influence of cooling rate during solidification on the three dimensional (3D) morphology of iron...
The aluminium based engineering alloy AW 6016 of nominal composition 98.44 Al 0.45 Mg 0.96 Si 0.11 F...
<div><p>A new methodology to study the precipitation crystallography of dispersoids in an Al matrix ...
The shapes and orientations of precipitates have important influences on the mechanical properties o...
In aluminium alloys, iron is a common impurity as it is unavoidably picked up in practice. The exces...
International audienceThis paper focus on the hardening precipitation in a 2650 Al(CuMg) aluminium a...