A simple and sensitive solid phase extraction procedure on Amberlite XAD-1180 resin is presented for the determination of chromium, cobalt, manganese and nickel at trace levels by atomic absorption spectrometry. The analyte ions were quantitatively taken at pH 9 by using ammonia/ammonium acetate buffer without any chelating agent. The influences of some analytical parameters such as sample volume, eluent type and flow rates on the retention of Cr, Co, Mn and Ni ions were examined. No influences were observed from the matrix ions of table salt samples. The detection limits for Cr, Co, Mn and Ni were 0.27 mug/g: 0.11 mug/g, 0.13 mug/g and 0.086 mug/g, respectively. The proposed separation-enrichment method was applied for the atomic absorptio...
A simple and sensitive separation and preconcentration technique for the determination of trace amou...
This work describes a procedure for the separation-preconcentration of Fe(III), Pb(II) and Cr(III) f...
Copper, cobalt, cadmium, lead, nickel, and chromium contents of table salt samples were determined b...
A simple and sensitive solid phase extraction procedure on Amberlite XAD-1180 resin is presented for...
A simple and sensitive solid phase extraction procedure on Amberlite XAD-1180 resin is presented for...
A simple and sensitive solid phase extraction procedure on Amberlite XAD-1180 resin is presented for...
Copper, cobalt, cadmium, lead, nickel, and chromium contents of table salt samples were determined b...
A separation/enrichment procedure has been established for atomic absorption spectrometric determina...
A separation/enrichment procedure has been established for atomic absorption spectrometric determina...
A preconcentration/separation method for determination of Cr(III), Cd(II), Bi(III) and Co(II) has be...
A new method using a column packed with Amberlite XAD-2010 resin as a solid-phase extractant has bee...
A preconcentration/separation method for determination of Cr(III), Cd(II), Bi(III) and Co(II) has be...
A new method for separation and preconcentration of trace amounts of Cu(II), Ni(II), Pb(II), Cd(II) ...
An AXAD - 1180 - TSA chelating resin was prepared by covalently linking thiosalicylic acid with Ambe...
A simple, fast, and sensitive column solid phase extraction study has been proposed for flame atomic...
A simple and sensitive separation and preconcentration technique for the determination of trace amou...
This work describes a procedure for the separation-preconcentration of Fe(III), Pb(II) and Cr(III) f...
Copper, cobalt, cadmium, lead, nickel, and chromium contents of table salt samples were determined b...
A simple and sensitive solid phase extraction procedure on Amberlite XAD-1180 resin is presented for...
A simple and sensitive solid phase extraction procedure on Amberlite XAD-1180 resin is presented for...
A simple and sensitive solid phase extraction procedure on Amberlite XAD-1180 resin is presented for...
Copper, cobalt, cadmium, lead, nickel, and chromium contents of table salt samples were determined b...
A separation/enrichment procedure has been established for atomic absorption spectrometric determina...
A separation/enrichment procedure has been established for atomic absorption spectrometric determina...
A preconcentration/separation method for determination of Cr(III), Cd(II), Bi(III) and Co(II) has be...
A new method using a column packed with Amberlite XAD-2010 resin as a solid-phase extractant has bee...
A preconcentration/separation method for determination of Cr(III), Cd(II), Bi(III) and Co(II) has be...
A new method for separation and preconcentration of trace amounts of Cu(II), Ni(II), Pb(II), Cd(II) ...
An AXAD - 1180 - TSA chelating resin was prepared by covalently linking thiosalicylic acid with Ambe...
A simple, fast, and sensitive column solid phase extraction study has been proposed for flame atomic...
A simple and sensitive separation and preconcentration technique for the determination of trace amou...
This work describes a procedure for the separation-preconcentration of Fe(III), Pb(II) and Cr(III) f...
Copper, cobalt, cadmium, lead, nickel, and chromium contents of table salt samples were determined b...