The effect of curing light variations on bulk curing and wall-to-wall quality of two types and various shades of resin composites.

PubMed ID: 9823095OBJECTIVES: This study evaluated the influence of light intensity and irradiation time variations on the curing efficacy of two types and various shades of resin composites and the effect of reduced light intensity on the preservation of wall-to-wall continuity. MATERIALS AND METHODS: Three microfilled composites (in three different shades) and one hybrid composite were used in this study. Polymerization shrinkage, and the hardness and adaptation of adhesive restorations in dentin cavities were determined at light intensities of 175 and 700 mW/cm2 and irradiation times of 10 and 60 s. Data were compared using in a general linear model analysis. RESULTS: Shrinkage measurements were the indication of conversion and conversion rate. Reduced intensity slowed down the rate of polymerization but did not reduce the conversion as long as an irradiation time of 60 s was employed. High-energy irradiation caused increased separation of the composite from the tooth structure. On the basis of obtaining optimal conversion and adaption, it was demonstrated that the irradiation time to be more effective than irradiation energy. SIGNIFICANCE: Light-cured composites require an understanding of their structure, pigmentation and irradiation parameters to obtain optimal performance. High intensity light-curing does not necessarily lead to optimal quality