Solid-state dye-sensitized solar cells fabricated with nanoporous TiO2 and TPD dyes: Analysis of penetration behavior and I-V characteristics

WOS: 000291478400018We present the synthesis, electrochemical properties and device-based investigation of triphenylene diamine (TPD) sensitizer with an extended pi system consisting of donor, electron conducting and anchoring group for solid-state dye-sensitized solar cells. Solid-state dye-sensitized solar cells were fabricated using blocking TiO2 electrodes, nanoporous TiO2 electrodes and the organic hole-transporting medium, HTM (spiro-OMeTAD) in a fluorine doped tin oxide/blocking TiO2/nanoporous TiO2/TPDs/hole transport material/Au configuration. Solid state dye sensitized solar cell consisting of TPD_2 as sensitizer on mesoporous TiO2 shows the best results with a short-circuit current of 2.8 mA/cm(2), an open circuit voltage of 835 mV and an overall conversion efficiency of 0.97%. (C) 2011 Elsevier B.V. All rights reserved.Scientific Research Council of Turkey (TUBITAK)Turkiye Bilimsel ve Teknolojik Arastirma Kurumu (TUBITAK); European Science Foundation (ESF)European Science Foundation (ESF)We acknowledge the Project support funds to Scientific Research Council of Turkey (TUBITAK) and to European Science Foundation (ESF). I thank Mechanical Engineer M.Sc. Cagatay Ela for proofreading and his support