Add to ORKGThis paper presents the theory of uniformly laterally loaded tension members, and applies it to rods, tubes and angles as used in roof and wall bracing. Experiments on pretensioning of rods are reported. Design examples for rods, tubes and angles are presented. Refs
When a sway force acts on a cross-bracing system, one of the braces goes into a tension state while ...
Angle profiles are amongst the most common structural steel shapes for construction purposes. Howeve...
Sandwich wall elements are often used as cladding on industrial buildings together with a steel fram...
The behavior of rods and tubes as horizontal tension members is investigated In the design of double...
The behavior of rods and tubes as horizontal tension members is investigated. Pretensioning forces m...
Metal thin-walled members have been widely used in building industry. Usually they are utilized as p...
One of the most critical design components in light framed residential structures is bracing. This i...
This paper presents simple methods of analysis for preliminary design of high-rise structures compri...
Technical report on testing and analysis of rod-bracing as employed in metal buildings.Rod or cable ...
The paper discusses a calculation of rational parameters of main flexural rod used in combined roof ...
This thesis presents the results of a theoretical and experimental study of the lateral buckling of ...
The subject matter of this paper is the interaction of flexure and compression in steel beam-columns...
AbstractSandwich panels, usually used as members of wall or roof cladding, can provide lateral and t...
While the design and technology of conventional low rise light framed residential structures are rel...
The axial behaviour and design of hot-finished high strength steel tubular elements with internal pr...
When a sway force acts on a cross-bracing system, one of the braces goes into a tension state while ...
Angle profiles are amongst the most common structural steel shapes for construction purposes. Howeve...
Sandwich wall elements are often used as cladding on industrial buildings together with a steel fram...
The behavior of rods and tubes as horizontal tension members is investigated In the design of double...
The behavior of rods and tubes as horizontal tension members is investigated. Pretensioning forces m...
Metal thin-walled members have been widely used in building industry. Usually they are utilized as p...
One of the most critical design components in light framed residential structures is bracing. This i...
This paper presents simple methods of analysis for preliminary design of high-rise structures compri...
Technical report on testing and analysis of rod-bracing as employed in metal buildings.Rod or cable ...
The paper discusses a calculation of rational parameters of main flexural rod used in combined roof ...
This thesis presents the results of a theoretical and experimental study of the lateral buckling of ...
The subject matter of this paper is the interaction of flexure and compression in steel beam-columns...
AbstractSandwich panels, usually used as members of wall or roof cladding, can provide lateral and t...
While the design and technology of conventional low rise light framed residential structures are rel...
The axial behaviour and design of hot-finished high strength steel tubular elements with internal pr...
When a sway force acts on a cross-bracing system, one of the braces goes into a tension state while ...
Angle profiles are amongst the most common structural steel shapes for construction purposes. Howeve...
Sandwich wall elements are often used as cladding on industrial buildings together with a steel fram...