Guided wave SHM system for damage detection in complex composite structure

The paper deals with the development of a Finite Element (FE) model aimed to simulate the propagation mechanisms of guided waves in a complex composite structure, such as a blended Glass Fibre Reinforced Polymers (GFRP) winglet, for real-time damage detection and monitoring purposes. The reliability of the herein presented FE model has been assessed against an experimental tests campaign, involving the winglet under both reference/pristine configuration and impacted/damaged configuration, also changing the actuator location. Because of the good level of accuracy shown by the numerical-experimental comparisons, the FE model has been used also for numerically investigating new actuators and damage position configurations, not experimentally analysed. Damage Indexes (DI’s) have been calculated to quantify the variations of the signals’ amplitude caused by the induced damage. Moreover, the Probability Ellipse (PE) method, which estimates the probability of the presence of the damage in the monitored area starting from the knowledge of selected DI’s for each sensors-path, has been used in both older and newer damage position. The accuracy of the PE method in detecting the damage location is herein discussed