Add to ORKGQuickly quenched foils of Pb - Cd system have the microcrystalline structure and texture (111). Microhardness of the alloy depends on the impurity type and annealing temperature
In this article we consider electrophysical and mechanical properties of TiSi2, which is produced by...
Influence of cryogenic conditions of deformation on refining the structural Cu components in case of...
The influence of the rare-earth doping on the microhardness of the Cz-silicon and Cz-germanium monoc...
Quickly quenched foils of Pb - Cd system have the microcrystalline structure and texture (111). Micr...
Quickly quenched foils of D 16 alloy are characterized with texture (111). Aluminium solid solution ...
The texture of rapidly solidified aluminium foils is (111). The dislocation density is 1,5 *109 cm-2...
Results of investigation of grain structure and microhardness of rapidly solidified binary Bi-(8-12)...
The rapidly quenched foils of Bi1-xSbxTe are characterized by the (10‾12) texture. Thermoelectric fo...
The composite nickel-boron-diamond films microhardness is shown to be 1,5-2 times higher than this o...
The influence of quenching between the critical temperature range of hardness and wear processes of ...
Quickly quenched foils of Bi-15 at.% Sb, doped germanium and sulphur, have the texture (1012). In Bi...
The paper discussed the effect of tungsten inclusion into deposited from hypophosphite solutions Ni-...
The texture was investigated for hot-extrude Mg-Li alloy bar with three different contents of Y by X...
Working mass based on natural quartz with additions of meal, enamel and may be liquid glass. Solid c...
According to the RoHS directive (July 2006), in the European Union the use of a number of hazardous ...
In this article we consider electrophysical and mechanical properties of TiSi2, which is produced by...
Influence of cryogenic conditions of deformation on refining the structural Cu components in case of...
The influence of the rare-earth doping on the microhardness of the Cz-silicon and Cz-germanium monoc...
Quickly quenched foils of Pb - Cd system have the microcrystalline structure and texture (111). Micr...
Quickly quenched foils of D 16 alloy are characterized with texture (111). Aluminium solid solution ...
The texture of rapidly solidified aluminium foils is (111). The dislocation density is 1,5 *109 cm-2...
Results of investigation of grain structure and microhardness of rapidly solidified binary Bi-(8-12)...
The rapidly quenched foils of Bi1-xSbxTe are characterized by the (10‾12) texture. Thermoelectric fo...
The composite nickel-boron-diamond films microhardness is shown to be 1,5-2 times higher than this o...
The influence of quenching between the critical temperature range of hardness and wear processes of ...
Quickly quenched foils of Bi-15 at.% Sb, doped germanium and sulphur, have the texture (1012). In Bi...
The paper discussed the effect of tungsten inclusion into deposited from hypophosphite solutions Ni-...
The texture was investigated for hot-extrude Mg-Li alloy bar with three different contents of Y by X...
Working mass based on natural quartz with additions of meal, enamel and may be liquid glass. Solid c...
According to the RoHS directive (July 2006), in the European Union the use of a number of hazardous ...
In this article we consider electrophysical and mechanical properties of TiSi2, which is produced by...
Influence of cryogenic conditions of deformation on refining the structural Cu components in case of...
The influence of the rare-earth doping on the microhardness of the Cz-silicon and Cz-germanium monoc...