Add to ORKGIn answer to increased interest in using high-temperature (above 212 F) drying of wood, a method is described to extrapolate low-temperature equilibrium moisture content (EMC) data to high temperatures. The results are compared with data in the literature, and EMC data from 212 F to 300 F are presented in a form useful for kiln control as well as for other uses
A method to estimate the surface moisture content below the fibre saturation point that is a functio...
The equilibrium moisture content (EMC) of Russian larch wood, Sugi wood, and Hinoki wood was measure...
Several methods were compared for evaluating relative humidities at temperatures between 210 and 300...
Equilibrium moisture content of solid wood and reconstituted wood is analyzed to determine the level...
Equations are derived to evaluate psychrometric relationships over a range of dry bulb temperatures ...
Relatively few studies have been performed on the equilibrium moisture content (EMC) of wood under c...
Relatively few studies have been performed on the equilibrium moisture content (EMC) of wood under c...
Relatively few studies have been performed on the equilibrium moisture content (EMC) of wood under c...
Relatively few studies have been performed on the equilibrium moisture content (EMC) of wood under c...
A correlation of drying rates based on the physics of drying has been developed for plantation-grown...
A method to estimate the surface moisture content below the fibre saturation point that is a functio...
Experiments were conducted on the water sorption characteristics of three wood species, for both juv...
Seven wood sorption models available in the literature were parameterized for prediction of equilibr...
Wood equilibrium moisture content (EMC) was measured under vacuum by an electronic method. A wafer w...
This paper evaluates the performance of equilibrium moisture content (EMC) predictions using the lea...
A method to estimate the surface moisture content below the fibre saturation point that is a functio...
The equilibrium moisture content (EMC) of Russian larch wood, Sugi wood, and Hinoki wood was measure...
Several methods were compared for evaluating relative humidities at temperatures between 210 and 300...
Equilibrium moisture content of solid wood and reconstituted wood is analyzed to determine the level...
Equations are derived to evaluate psychrometric relationships over a range of dry bulb temperatures ...
Relatively few studies have been performed on the equilibrium moisture content (EMC) of wood under c...
Relatively few studies have been performed on the equilibrium moisture content (EMC) of wood under c...
Relatively few studies have been performed on the equilibrium moisture content (EMC) of wood under c...
Relatively few studies have been performed on the equilibrium moisture content (EMC) of wood under c...
A correlation of drying rates based on the physics of drying has been developed for plantation-grown...
A method to estimate the surface moisture content below the fibre saturation point that is a functio...
Experiments were conducted on the water sorption characteristics of three wood species, for both juv...
Seven wood sorption models available in the literature were parameterized for prediction of equilibr...
Wood equilibrium moisture content (EMC) was measured under vacuum by an electronic method. A wafer w...
This paper evaluates the performance of equilibrium moisture content (EMC) predictions using the lea...
A method to estimate the surface moisture content below the fibre saturation point that is a functio...
The equilibrium moisture content (EMC) of Russian larch wood, Sugi wood, and Hinoki wood was measure...
Several methods were compared for evaluating relative humidities at temperatures between 210 and 300...